Commuterising a 531c

[66 triumph daytona]

I recently built up a nice lightweight commuter for my old man,built around a 531c.For comfort I fitted a shorter 100mm stem with a bit of rise and teamed that with flat bars and bar ends.After a few weeks on it he wants an even more upright position.Short of fitting high rise downhill bars is there any way to achieve this?The stem is a 1" quill ATAC.

 

[BigFoz]

SWap stem forquill - Ahead converter, and can run stems with rise, or add spacers

 

[Jonny69]

Risers instead of flat bars? Should get you 40mm higher (1 3/4” in old money)

 

[KermitGKona88]

Re:

Velo Orange, Left bank, Montmatre, and Tourist bars give extra height too.

 

[66 triumph daytona]

Re: Re:

Velo Orange, Left bank, Montmatre, and Tourist bars give extra height too.

That sounds like the solution.

 

[Rod_Saetan]

I love the 'North Road' shape bars on city bikes, lots of sweep, plenty of angle and a bit of rise too, they are a very comfortable hand position. Also, you can get some pretty cheap ones from Raleigh/ITM.

 

[Jamiedyer]

As well as Velo Orange, Nitto also do some nice road riser bars.
Planet X always have them well discounted.

Jamie