CNC Stem (Planet X?)

[stauqmuk]

The one in your pics look similar but not exactly like the Azonic Shorty stems. They come in all different sizes and rises Jensonusa.com had a deal on them a few months ago for like $25 and CRC has them for 20gbp. They also look like the Azonic Revenge stem if you cant find the Shorty in the right dimensions.

http://www.chainreactioncycles.com/Mode ... delID=1020

That said, in my experience the threads on these stems are terrible. I've had a few because its the only thing that fits the PDW bar (available in 28.6 clamp) and every time the threads on all 8 bolt holes end up coming out.

 

[Azonic DS1]

The one in your pics look similar but not exactly like the Azonic Shorty stems. They come in all different sizes and rises Jensonusa.com had a deal on them a few months ago for like $25 and CRC has them for 20gbp. They also look like the Azonic Revenge stem if you cant find the Shorty in the right dimensions.

http://www.chainreactioncycles.com/Mode ... delID=1020

That said, in my experience the threads on these stems are terrible. I've had a few because its the only thing that fits the PDW bar (available in 28.6 clamp) and every time the threads on all 8 bolt holes end up coming out.

The Azonic Shorty is next on my list, chainreaction have them for £20 but only with 25.4mm bar diameter mounts. I'm not to worried about the threads, they've been ok in the past and if it comes to it i'll just helicoil them

 

[perry]

Probably not what your after if your going for the larger bars but thought I'd point you at it in case you hadn't seen it .

http://cgi.ebay.co.uk/Ahead-Stem-80mm-t ... 335964d318

the black ano could be removed with caustic soda .

 

[Azonic DS1]

Probably not what your after if your going for the larger bars but thought I'd point you at it in case you hadn't seen it .

http://cgi.ebay.co.uk/Ahead-Stem-80mm-t ... 335964d318

the black ano could be removed with caustic soda .

Thats not a bad find Will keep an eye on it, i can bore the bar clamps out and get the anodize removed at work if i have to.

 

[perry]

You might be interested in this one too , has more rise to it but not quite long enough by the looks of it .

http://cgi.ebay.co.uk/Ovation-Stem_W0QQ ... 3ca9882e73

 

[Spooky]

Re: Stem

Got a really nice Kore Elite stem, the down hill cnc'd version, no rise, but pretty short.

Wowser I saw the thread and was going to offer the exact same stem! Kore B52 Lovely!

 

[Azonic DS1]

You might be interested in this one too , has more rise to it but not quite long enough by the looks of it .

http://cgi.ebay.co.uk/Ovation-Stem_W0QQ ... 3ca9882e73

Already watching that one but cheers

 

[bkt]

found this on ebay mite be ok for you
http://cgi.ebay.co.uk/CNC-machined-bloc ... 3ca7bd3476