Chainrings, Chainset, Grips, Bars, Post, V's !

Lookback

Retrobike Rider
Feedback
View
Morning,

Ok, time for a clear out. Nothing totally spectacular in here, but i'll end up binning it if no one wants it. All prices include postage. Normal rules apply (dibs here and then PP Gift).

All pics here: http://www.flickr.com/photos/78364042@N ... 689727176/

Pic 1 - Chainrings and Pedal
Top Left - Shimano XT (more or less 100% sure its XT) Mega 9 44T - stamped M9 N-44 on rear. Stickers intact. Looks like it has life left in it. £5 Posted

Top Right - Shimano Middle Ring. 32T. Stamped M9 N-32 on rear. Not sure what it came off, but teeth look a bit pointy. We'll call this Karma, but give me £2 for postage. SOLD

Bottom Left - Shimano Granny Ring. 22T. Stamped IG M-22 / M9 N-22 on rear. Hardly ever use the granny ring, so this looks in pretty good condition to me. £5 Posted

Bottom Middle - Sugino 20T Granny Ring, came off one of those Marin White Industries chain sets BITD. Stamped 20T Sugino CSS-II HD-C on the rear. Needs a bit of a clean, but looks in good condition. £5 Posted

Bottom Right - Old Shimano Left Hand SPD. Battered. No cleats, rough bearings. Spares only really. Its one of these: http://www.mtbr.com/cat/older-categorie ... 18crx.aspx Karma, but give me £3 for postage.

Pic 2 - Tektro V-Brakes
Might have come off a Norco. Now missing pads, noodles and fixings. What you get is what you see. £5 Posted

Pic 3 - Grips and Chainset
Top Left - No name grips. Not been cut down. £4 Posted

Top Middle - Bontrager Grips. No longer for sale.

Right - Shimano LX FC-M569 175mm Chainset. 5 bolt, 22 / 32 / 42. Needs a good clean. Top ring look ok-ish and Granny rings look pretty good, but middle is pretty worn. Tapers look a bit worn, but should have some life left in them. Logos have rubbed off. Inc crank bolts. £15 posted (and to be fair, most of that will be postage costs!)

Bottom - Kalloy seat post. 26.4mm / 280mm ish long. Clamp is a bit corroded, but works fine. £5 posted

Pics 4 & 5 - Bars
Silver bars, stamped with MTB-AL-112 10 degree. 600mm. The weird thing about these is that the centre section is flat either side of middle. Don't know why, but its supposed to be like that! There are some scratches and a few deepish ones around where the controls would go. £6 Posted

So there you have it. Some fairly run of the mill stuff

Later
Si :LOL:
 
Back
Top