Cannondale Beast of the East rebuild / refresh project
- Thread starter Mindmap3
- Start date
I'm quite partial to Cannondales (I know there's not much love fir them on here), especially the hardtails from the 96-98 era. I loved the idea of the Headshock and the engineering behind it.
Managed to source any used chain tensioner and 16 wide based rear cog from a chap on STW.
Managed to source any used chain tensioner and 16 wide based rear cog from a chap on STW.
beechdaleboy
Kona Fan
Nice examples there.
Hoping my decals will arrive this week so I can get then fitted this weekend. The weather looks a bit ropey for Saturday so it'll give me something to do.
I'm going to build my own wheels I've decided because the quotes I've had have been really expensive or people just aren't interested because I've got the hubs etc.
Hoping my decals will arrive this week so I can get then fitted this weekend. The weather looks a bit ropey for Saturday so it'll give me something to do.
I'm going to build my own wheels I've decided because the quotes I've had have been really expensive or people just aren't interested because I've got the hubs etc.
Bit of an update on this...
First if all I picked the frame up from the powder coaters yesterday afternoon andim pretty pleased. It's not 100% perfect but not far off but it didn't cost the earth.
First job was to pop on the BETD reducer cups so that I can run 1 1/8 forks. The cups are nicely made and not too expensive. They're also deep enough that you a erase headset will have enough material to be supported properly.
I thn decided to wait unti the decals arrived from Gil_M...which they did this morning.
Work in progress...
Decals all on
Next I decided to hang on the parts that I had; headset pushed on no worries so next up where the forks and this is where things started to go wrong. Windwave are out of stock of new steerers so I put up a wanted ad to which Tizmo replied a d came up trumps with an ali steerer of 200mm. The price was right so I thought I'd take a punt. It arrived super quick but its too short so I'm going to have to wait until they're back in stock. It's a shame because the ali one is much, much lighter than the steel jobbies.
I'm going to have t take the frame to a bike shop to get the bottom bracket threads chased through because I struggled to get the bottom bracket in. This meant tha I couldnt get the bottom bracket in. Whilst I was trying to install it. I rested the frame against something and managed to rub two letters off the decals on the seat stays. Grrrrrr. I'm Hoping Gil will be able to sell me a replacement.
I managed to get a few things mounted, including the forks.
I'm pretty pleased with it so far and am looking forward to getting it finished.
I'm going to build by own wheels and will be ordering barge rims (Mavic 317's) and Sapim DB Race spokes at the end of the month. Will also get a BETD chainring and a KMC chain so it'll pretty much be good to go.
I've got a set of XTR V's on the way from Ringo.
First if all I picked the frame up from the powder coaters yesterday afternoon andim pretty pleased. It's not 100% perfect but not far off but it didn't cost the earth.
First job was to pop on the BETD reducer cups so that I can run 1 1/8 forks. The cups are nicely made and not too expensive. They're also deep enough that you a erase headset will have enough material to be supported properly.
I thn decided to wait unti the decals arrived from Gil_M...which they did this morning.
Work in progress...
Decals all on
Next I decided to hang on the parts that I had; headset pushed on no worries so next up where the forks and this is where things started to go wrong. Windwave are out of stock of new steerers so I put up a wanted ad to which Tizmo replied a d came up trumps with an ali steerer of 200mm. The price was right so I thought I'd take a punt. It arrived super quick but its too short so I'm going to have to wait until they're back in stock. It's a shame because the ali one is much, much lighter than the steel jobbies.
I'm going to have t take the frame to a bike shop to get the bottom bracket threads chased through because I struggled to get the bottom bracket in. This meant tha I couldnt get the bottom bracket in. Whilst I was trying to install it. I rested the frame against something and managed to rub two letters off the decals on the seat stays. Grrrrrr. I'm Hoping Gil will be able to sell me a replacement.
I managed to get a few things mounted, including the forks.
I'm pretty pleased with it so far and am looking forward to getting it finished.
I'm going to build by own wheels and will be ordering barge rims (Mavic 317's) and Sapim DB Race spokes at the end of the month. Will also get a BETD chainring and a KMC chain so it'll pretty much be good to go.
I've got a set of XTR V's on the way from Ringo.
Oh, I've also misplaced my canti bosses for the forks so will need to order a new set (hopefully they're in stock with Windwave). This just added to my frustration today.
I ended up moving onto my other half's Chameleon and fitted my Atlas cranks to my BFe. At least these went smoothly!
I ended up moving onto my other half's Chameleon and fitted my Atlas cranks to my BFe. At least these went smoothly!
- Feedback
- View
That does look VERY nice indeed. Really want a BOTE and this is my size - watching carefully!
Cheers.
I think it's going to slow down a bit now; got to wait for the steerers to come back into stock and for pay day sone can buy the rims and spokes. I guess it'll take a while fir me to get them done.
The trouble with all of this waiting is that I'm not very good at being patient!
I think it's going to slow down a bit now; got to wait for the steerers to come back into stock and for pay day sone can buy the rims and spokes. I guess it'll take a while fir me to get them done.
The trouble with all of this waiting is that I'm not very good at being patient!
Similar threads
