Can the hubs on Spin wheels be changed front to rear?

[Orion]

Reason I ask, I have a front wheel with a good hub, but a big crack and chunk missing from the carbon. I also have a rear wheel with a good rim, but I am missing the axle and freehub body.

Can I remove the hub from the front wheel and install it in the rear?

Any one done this?

I know it can be done on Aerospoke wheels, just not sure on these spins.

Thanks

 

[marin man]

It has been done before but usually only when the hub becomes loose when the glue fails,I would not want to try and remove the glue with heat on a wheel you need to re use,could muff the thermoplastic up you see :?

I did do this on a spinergy but the hub was removed by destroying a wheel and the wheel removed by destroying a hub,then I reassembled the bits and re glued them A real bugger but worth it if you really really need a rear wheel