- Feedback
- View
Yes it will
Wanted Campag 7/8 speed long cage rear mech
- Thread starter colinbow
- Start date
As I said:
It is likely to struggle with 34, although fitting a Goat Link mech dropper would help. Campag only designed their road mechs to handle 26T max.
It will probably wrap the chain OK (so have enough room to take up the slack), but isn't designed for large tooth rears.
It is better to swap chainset, having a 42T small chainring is making life unnecessarily difficult.
There are no mix and match combos for a Campag 8 speed shifter, so you are stuck with a pre-2001 mech. If you can find a Campag MTB rear mech you stand a better chance with big sprockets at the back. For full shifter / rear mech compatibility details see here:
https://www.cyclinguk.org/cyclists-library/components/transmission-gears/derailleur-gears/shimergo
It is likely to struggle with 34, although fitting a Goat Link mech dropper would help. Campag only designed their road mechs to handle 26T max.
It will probably wrap the chain OK (so have enough room to take up the slack), but isn't designed for large tooth rears.
It is better to swap chainset, having a 42T small chainring is making life unnecessarily difficult.
There are no mix and match combos for a Campag 8 speed shifter, so you are stuck with a pre-2001 mech. If you can find a Campag MTB rear mech you stand a better chance with big sprockets at the back. For full shifter / rear mech compatibility details see here:
https://www.cyclinguk.org/cyclists-library/components/transmission-gears/derailleur-gears/shimergo
Similar threads
