Re:
I pull mine out with a 1/4" unf stud and nut and a larger diameter tube with internal clearance for the sleeve (8-9mm?).
This does risk the thread on the sleeve, so you could sit the crown on the tube and knock the stud (or a long bolt) instead.
All the best,
I pull mine out with a 1/4" unf stud and nut and a larger diameter tube with internal clearance for the sleeve (8-9mm?).
This does risk the thread on the sleeve, so you could sit the crown on the tube and knock the stud (or a long bolt) instead.
All the best,