Sorted 28.6 braze on clamp and 1” forks needed to finish a build

[trailstar82]

As per title 28.6mm braze on clamp for mounting a front mech to frame. SORTED

Need one to finish my deltasportive karma build.

Preferably black clamp

Also need a set of 1” threadless/ahead forks to replace the horrible yellow ones on this bike. Not to long not too short steerer ;-)

View media item 1218

 

[hamster]

I'm not sure what you are looking for.
I have a barely used set of Columbus full carbon forks, 220mm steerer or thereabouts. £90 posted?

 

[trailstar82]

I'm not sure what you are looking for.
I have a barely used set of Columbus full carbon forks, 220mm steerer or thereabouts. £90 posted?

Thanks for the reply, wanted add updated to be clearer on the request.

Fork-wise I was after something a little cheaper

 

[Gtpulse]

I’ve got a few sets of 1” forks that were too short for what I needed. Will post up a bit later will be around the £40 posted mark I guess.

 

[KondratievsBike]

Horrible? Horrible?!? They're lush

 

[trailstar82]

Horrible? Horrible?!? They're lush

I can tell you’ve missed them a lot.

 

[Gtpulse]

No offence taken if none of these are any use!
Left to right are ITM spider; Miche?; Profile design slightly aero and finally Profile design straight leg. The straight ones are threaded at the top, I’ve used them with an aheadstem without issue. The aero profiles are probably the worst condition and missing paint at the top. The decals will come off on the ITM ones, I had a similar pair and they look better plain.

 

[TreaderSteve]

GTPulse's forks are all lovely which'll look grand on that frame - I like it a lot. If you wanted something steel though do ask as I seem to have accumulated some pretty decent steel ones which I suppose I'll never get round to finding a home for.

 

[trailstar82]

The straight blade look is appealing, just a shame they are threaded though. I’ll have to take proper measurements of the head tube and sizing.

 

[trailstar82]

Ok thanks all for the responses so far.

Need about 205-210mm of steerer and would like something straight if possible not yellow
;-)