22.2 diameter bars

[KermitGKona88]

Hi Everyone


After a pair of 22.2 diameter centre section bars, 2-3" rise or flat with 8 degree back sweep. Riser bars would need at least 105mm flat centre section.

Anything out there :?:

Cheers

Mark

 

[ishaw]

Re:

Might have some roox riser bars with a shim, will need to check diameter though.

 

[KermitGKona88]

Re:

 

[cce]

I've got some planet x with a 2 inch rise in the shed

 

[ishaw]

Re:

Here's a pic of the bar, it's about 660mm end to end and the middle section is approx 100mm before any rise. It is a 1 1/8 with the shim so should be what you need without it.

 

[KermitGKona88]

Re:

Sorry Ian, I have a pair from 89' that are almost identical to those. Need that extra 5mm as I want to use them with an SR slingshot stem

CCE are yours shimmed 22.2 with a 105mm centre ?

Cheers

Mark

 

[cce]

Re:

I don't think they're quite 105mm I'm afraid

 

[CristiRD]

How about this Humpert riser, 650mm wide with 120 mm flat middle section?

 

[KermitGKona88]

Re:

Those Humpert bars look just the job, how much are you wanting for them please :?:

 

[CristiRD]

Hi Mark, glad that they are what you are looking for, maybe it happens that you have some spare XC Pro right thumbie, I need one for one of my projects.