1998 Salsa Ala Carte and 2002 Brodie Kinetic

[rigidftw]

Finally had a chance to take at least a little care of this thing.

It had some nasty creaks in the drivetrain last time I rode it. Which was some time in late 2022…

So I took it apart, cleaned all the bits I, applied some grease where necessary and threw it back together.

I‘ll need to ride is thing more… or rather again.

 

[KayOs]

Finally had a chance to take at least a little care of this thing.

It had some nasty creaks in the drivetrain last time I rode it. Which was some time in late 2022…

So I took it apart, cleaned all the bits I, applied some grease where necessary and threw it back together.

I‘ll need to ride is thing more… or rather again.

View attachment 869300View attachment 869301View attachment 869302View attachment 869303View attachment 869304View attachment 869305View attachment 869306View attachment 869307View attachment 869308

Allways love a brodie SSP, can't wait till mine is finished

 

[PanoIgano]

Must be a dream to ride as a single speed! You have now given me some interesting ideas…Enjoy

 

[rigidftw]

Added a Mac Ride spacer to have it eligible for everyday use. Such a smooth ride.

 

[rigidftw]

Followed the guy on the Norco down a trail, tried a stepdown jump with a decent gap for the very first time today, came a little short and touched down hard. Pretty noisy when that fork bottoms out!

 

[rigidftw]

 

[rigidftw]

Modeling a prototype stem for Cyber Cycles.

The clamp is 3D-printed from steel and just a concept for now. Printing would be way too expensive for a production run.