1989 Swallow Griffon - MBUK Test Bike... Finished - Page 12

Re: 1989 Swallow Griffon - MBUK Test Bike... Update P9

Would running a full outer to a seatpost ferrule be an option? Would at least take out the cheese wire problem. :shock:
 
Re: 1989 Swallow Griffon - MBUK Test Bike... Update P9

I spy a seatpost collar acting as a cable guide?
 

Attachments

  • Clipboard02.webp
    Clipboard02.webp
    144.8 KB · Views: 556
Re:

Christ you've got good eye sight....

on another note what's the chances that gnarly trail is actually a paved road, its certainly not as out back
as they'd have you believe as there's a retaining wall in the foreground

I don't want to take anything away from what Adrians doing nor for that matter the bike itself,
but the more I look at the original article the more you realise there was a lot of smoke and mirrors going on.


Missed you on Sunday at Dowies Adrian !
 

Attachments

  • Clipboard02.webp
    Clipboard02.webp
    101.3 KB · Views: 521
Re: 1989 Swallow Griffon - MBUK Test Bike... Update P9

Don't say things like that, my view of the mountain bike press and the virgin honest reporting of my youth will be tarnished forever. :wink:

As you were Adrian.... 8)
 
Re: Re:

Retro Spud":3uf3tfh4 said:
Missed you on Sunday at Dowies Adrian !

Love the Dowies trails - was there with 50 other fatties!! what time were you there?

Tried one type of rear hanger - failed.... on to the next - dammed if I am going to come back from two u brakes without a bit of a fight!!
 
Re: Re:

Coleman":kwa4mfbr said:
Retro Spud":kwa4mfbr said:
Missed you on Sunday at Dowies Adrian !

Love the Dowies trails - was there with 50 other fatties!! what time were you there?

Alas I rode past on the road with Gloucester CC ... Although it was on a 96 MTB with inch slicks... Which certainly marks me out for all the wrong reasons.
 
Re: 1989 Swallow Griffon - MBUK Test Bike... Update P9

https://247cycleshop.com/sturmey-archer ... sj520.html

FSPXXLSPK_P1.jpg


fs0915_crossclamp.jpg
 
Re: 1989 Swallow Griffon - MBUK Test Bike... Update P9

Well done Mark, that's the problem solved... 8)

FWIW this is the same part used for Zinn upper rollers. 8)
 

Attachments

  • sturmey-archer-pulley-assembly-1-inch-HSJ520.webp
    sturmey-archer-pulley-assembly-1-inch-HSJ520.webp
    21 KB · Views: 448
Re:

Thanks for all the suggestions 8)

This is the solution so far, slightly remodeled cable hanger..... gives that extra 1/2" needed :)
 

Attachments

  • IMG_1943.webp
    IMG_1943.webp
    15.9 KB · Views: 410
  • IMG_1942.webp
    IMG_1942.webp
    25 KB · Views: 410
Back
Top