1980's Peugeot Premeire/Aubisque restoration

[Jack1]

Hi All

I have been looking for a vintage Peugeot bike on Ebay for a while as a restoration project, its taken a while to find something I like the look of and more challenging something in my size (54cm). I have finally brought one and it arrived the other day.

I'v got it out the box tonight and started to figure out what's what, its seems to have some decent kit on it, Sachs Huret groupset, Wienman brakes, Iscasell seat , Mavic rims(back), HLE frame and Campagnolo locking skewers. I'm not sure if the kit on the bike would be original or has been upgraded? The front wheel is not a Mavic and looks like it's been replaced, its got a black finish on it which I will look to remove, not sure if I can sand and polish it or look for an matching Mavic 190FB. It weighs 11kg. Its difficult to make out the writing on the tyres but I think they are 700c x 19c! which seems difficult to find now, I have found some 20's or mayby I would be better to find some 23's.

The bike was advertised as a Carbolite Peugeot Premier, its got a Premiere sticker on it, but the frame is HLE (one up from Carbolite?) and when I search the internet I can't find a Premiere like it, if I search for Aubisque then there are bikes that look like it. So im a bit confused as to what it is, it would be great if anyone has any thoughts on what the bike is? there is a serial on the bottom bracket Y9C1 17556. Does anyone know what model year it might be?

I'm planning to bring it back to life over winter keeping it mostly original. Interestingly the bike has a Barry Monaghan sticker (presumably the shop that originally sold it), I've looked him up and it turns out he is former international cyclist and an national coach in Irish Cycling, which I think is pretty cool. I'll post some updates as they happen.

Anything information about the bike would be much appreciated.

Jack

 

[chickendrumsticks]

Hi Jack and welcome to Retrobike. Carbolite roughly = HLE. But as a starter restoration it's great. Don't spend loads of cash on new kit. Frankly the bike isn't worth it. Concentrate on cleaning and restoring what you have. You'll learn a lot and end up with a much improved machine.
And keep posting!

 

[non-fixie]

Welcome, @Jack1 !

Getting a wider, nicer tyre is a good idea. 23 is an improvement over 19mm, but if you have the space, 25 or 28 is even better. Get some nice light folding tyres. It'll be worth it.

Good luck with the project!

 

[Harvo]

Nice resto project. If you want to date it, have a look at the components eg brakes as they should be date stamped. Good luck with it.

 

[Jack1]

I've made a start! I've removed all the components off the bike, had some fun and games removing the crank arms, which came off with a puller and some heat. I've decided to respray the bottom bracket, chain stays, part of the top tube, down tube and seat tube retaining the original decals, so took the paint of with an angle grinder with a wire brush cup and various brass brushes in a drill. I've taken the front wheel apart as im going to remove the black coating. So polishing up the spoke nipples and spokes with wire wool, WD40 and then Autosol metal polish.... going to have to do the same on the rear now