Center BB to top of seat tube = 16"
I bought this quite recently because my first proper bike was a 1998 Kona Nunu celebration model (who remembers?!) and this bike looks very very similar to it.
In my ownership it has had new cables and outers throughout, new brake pads and rear noodle. It needs nothing else except new grips as the originals (yes, originals!) have perished through age. This gives you an idea of how much use this bike has seen its 14 years!
I have some ourys to go with the bike but I couldn't bring my self to take the old grips off. It still has the original Lumpy and Gravy tyres that are in fantastic condition, front and rear suspension works the same as it did on the day it left the dealer. The lower legs of the forks are almost immaculate.
You can see by the unprotected chain stay that this bike has probably never even seen dirt, certainly never mud. It still has the 'made in Taiwan' sticker on the BB!
- Who ever gets this will not be disappointed, if I wasn't being so strict about things that I should sell (some of you may have noticed I've been flogging a lot of my things just recently) I'd definitely keep this bike, even just for looking at if nothing else!
The only things that are not original on this bike are the pedals (Wellgo V12 reps) and the seat post has been swapped for a longer one.
The official spec:
FRAME AND FORK:
Frame Construction- TIG-welded
Frame Tubing Material- 7005 aluminum, double-butted
Fork Brand & Model- Rock Shox Judy C, 3.15" travel
Fork Material- Aluminum/magnesium, triple-clamp crown
Rear Shock- Fox Vanilla, 3.5" travel
COMPONENTS:
Component Group- Mountain Mix
Brakeset- Avid 1D-10 brakes, Avid AD-1.0 L levers
Shift Levers- Shimano Alivio RapidFire Plus
Front Derailleur- Shimano AceraX top-swing
Rear Derailleur- Shimano Deore LX SGS
Crankset- Shimano STX-RC, 22/32/42 teeth
Pedals- Wellgo V12 copy
Bottom Bracket- Shimano BB-UN52
BB Shell Width- 68mm English
Rear Cogs- 8-speed, 11 - 30 teeth
Chain- Shimano CN-IG51, 1/2 x 3/32"
Seat post- Kona Thumb, 30.0mm diameter
Saddle- SDG Comp
Handlebar- Kona DB riser
Handlebar Extensions- Not included
Handlebar Stem- Kona Control
Headset- 1 1/8" threadless Ritchey Logic
WHEELS:
Hubs - Front: Kona OB-1, Rear: Shimano STX-RC
Rims- Mavic X138
Tires- Front: 26 x 2.10" Kona Lumpy, Rear: 26 x 2.10" Kona Gravy
Spoke Brand- Stainless steel, 1.8mm front, 2.0mm rear straight gauge
Spoke Nipples- Brass nipples
£175 collection from CR8 I'll get a bike box from my local bike shop and wrap it with lots of care and attention.
Thanks
I bought this quite recently because my first proper bike was a 1998 Kona Nunu celebration model (who remembers?!) and this bike looks very very similar to it.
In my ownership it has had new cables and outers throughout, new brake pads and rear noodle. It needs nothing else except new grips as the originals (yes, originals!) have perished through age. This gives you an idea of how much use this bike has seen its 14 years!
I have some ourys to go with the bike but I couldn't bring my self to take the old grips off. It still has the original Lumpy and Gravy tyres that are in fantastic condition, front and rear suspension works the same as it did on the day it left the dealer. The lower legs of the forks are almost immaculate.
You can see by the unprotected chain stay that this bike has probably never even seen dirt, certainly never mud. It still has the 'made in Taiwan' sticker on the BB!
- Who ever gets this will not be disappointed, if I wasn't being so strict about things that I should sell (some of you may have noticed I've been flogging a lot of my things just recently) I'd definitely keep this bike, even just for looking at if nothing else!
The only things that are not original on this bike are the pedals (Wellgo V12 reps) and the seat post has been swapped for a longer one.
The official spec:
FRAME AND FORK:
Frame Construction- TIG-welded
Frame Tubing Material- 7005 aluminum, double-butted
Fork Brand & Model- Rock Shox Judy C, 3.15" travel
Fork Material- Aluminum/magnesium, triple-clamp crown
Rear Shock- Fox Vanilla, 3.5" travel
COMPONENTS:
Component Group- Mountain Mix
Brakeset- Avid 1D-10 brakes, Avid AD-1.0 L levers
Shift Levers- Shimano Alivio RapidFire Plus
Front Derailleur- Shimano AceraX top-swing
Rear Derailleur- Shimano Deore LX SGS
Crankset- Shimano STX-RC, 22/32/42 teeth
Pedals- Wellgo V12 copy
Bottom Bracket- Shimano BB-UN52
BB Shell Width- 68mm English
Rear Cogs- 8-speed, 11 - 30 teeth
Chain- Shimano CN-IG51, 1/2 x 3/32"
Seat post- Kona Thumb, 30.0mm diameter
Saddle- SDG Comp
Handlebar- Kona DB riser
Handlebar Extensions- Not included
Handlebar Stem- Kona Control
Headset- 1 1/8" threadless Ritchey Logic
WHEELS:
Hubs - Front: Kona OB-1, Rear: Shimano STX-RC
Rims- Mavic X138
Tires- Front: 26 x 2.10" Kona Lumpy, Rear: 26 x 2.10" Kona Gravy
Spoke Brand- Stainless steel, 1.8mm front, 2.0mm rear straight gauge
Spoke Nipples- Brass nipples
£175 collection from CR8 I'll get a bike box from my local bike shop and wrap it with lots of care and attention.
Thanks