Wanted 1” steerer carbon forks compression plug

[Retro-Racer69]

Hi guy’s having problems sourcing a compression plug/expander for my 1” carbon steerer forks,any of you guys got one surplus?? Thanks in advance neil

 

[pigman]

https://www.ebay.co.uk/itm/15593689...UQ5aibx/9OQkjDD/Pzzem4YJDT+o|tkp:BFBMzIiE7Plj

 

[Retro-Racer69]

Thanks pigman,I seen that earlier and checked the dimensions and it looked too big as internal diameter of steerer is 19mm and that expander is 22mm

 

[tonyf39]

i'll have a look in my stash, think I have a NOS CLub Roost expander ring/wedge and top cap kit, will measure the wedge and report back

 

[Retro-Racer69]

Hi Tony,many thanks for your reply and time ,I appreciate it,

 

[tonyf39]

Hi Tony,many thanks for your reply and time ,I appreciate it,

Apologies, not found it yet, thinking I've put it somewhere but not got to it yet.

 

[Retro-Racer69]

Hi Tony,thanks mate I appreciate your time looking for it,if you do come across it I’d greatly appreciate you getting in touch,cheers neil

 

[rc300]

https://www.freewheel.co.uk/m-part-carbon-fork-expander-1-inch-hpt0406

 

[rc300]

Thinking about it you will have a pretty thick wall on the steerer with a 19mm internal so you could just use some rubber hose and replace the metal expansion parts on a std one and a flanged nut at the bottom to pull up like a old bar end plug

 

[Retro-Racer69]

Thanks for the info mate,I’ve managed to find a carbon one made by M part and it works perfectly,cheers mate