Search results

Re: 1991/2 Deore DX on Mavic 231 Wheelset PM

Needed, a 26.8 good condition black post, needs to be 380 to 400mm or longer. Layback or otherwise, would like a kalloy or kalin ideally but without garish logos on, though lower end stuff seems harder to find than the good stuff so consider most things....

Very nice Araya VX300 rims. 700c, 36 hole, minimal wear to sidewalls, this model rim has a deliberately 'concave' profile to grip brake blocks better so the usual "hold something flat against it in a photo" oesnt work(Googling araya wo vx300 will bear this out) , but the dark finish on the...

Choice of pace rc35 1" threaded steerers - 184mm long from end to end (about 25-30mm goes into the crown remember!) and 38mm of thread , or another 160mm long end to end with 23mm of thread - no circlip on either although I run two sets without one and its never been an issue. £20 posted each

A pair of 36 hole G40 rims in really good condition, decals still intact. Corrosion to rear of spoke eyelets as often the case. I bought them in a set of wheels for £110 and just needed the hubs so think £50 posted seems right? Just trying something new with pictures so fingers crossed.....

Pm

This guy had some..hopefuly link works. Last time I looked he had more than one set plus some singles. http://bicyclist.cc/shop/kingsbery-mtb- ... rs-silver/

Cracking, thank you....I think I was hoping to get away without redishing which I now realise is just me being lazy so I will dig the jig out and dust it off, as well as my skills, its been a while....

Thanks both....with the reasurance that they should move I took the advice and soaked in WD40 for the day and after a bit of grunting on the spanners again they are now seperated and off the axle...cheers

So Im putting a 135 axle into a 130 M732 hub, the plan being to add a 2.5mm washer each side so it sits central in a 135mm frame. However the cone and locknut on the drive side refuses to budge, I simply can not undo them from each other to get the extra washer between. Its a NOS axle and cones...

Tremendous, I would be interested in the lot if I can get the spotty top, fingers crossed as he didnt seem too fussed with him saying either would be fine, so hopefully he wants/would be happy the other one. Are the shorts and tops large?

Lord above if cocodemer isnt fussed whi h can I bagsy the more spotty (2nd) one.....will pm

Maintaining the similar-but-different theme I've a Vetta Magnanese thing which is a bit Flite-esque in appearance, all I remember is its the same as I had on my '94 P7 which won't help you a lot. Dandy condition, logos have gone at side but no rips or big scuffs etc I fail miserably to be able...

PM (In reply to your reply....)

Re: Ive a rc35 one which I suspect is the same, what length does it need to be? (Not sure its got the bottom circlip but I ran rc35s without £it for years and it was fine)

It appears the wedge nut thing on the bottom of controltech quill stems is at a different angle to every other stem in the world. Most are cut at 45/45 degrees but these are more like 30/60. No chances that someone has a ruined stem or a spare wedge nut for one is there...

Re: PM incoming on chainset, "upper" pedals......

Re: Very nice. I looked at this for the good lady but hummed and harred too long then it was gone..... If you ever feel the need to offload that Slalk stem (or any other from your Oranges...) do let me know. Im not half struggling to find a couple for two recent frame aquisitions.

You know I successfully used a seatpost shim, 28.6 down to 25.4 from sjs. Cut it down, put it in upside down, not had a problem. Required a little filing to the lip round the top to get it under the crown (the lip does the job the pace circlip used to in stopping it pulling up, albeit you should...

Re: Pace RC35 cantis studs, not monobox Lordy Ive been posting on here for some of these too....so if someones got some and longun doesnt take them can they pm me, cheers