Search results

Here is an example of the rear dropouts and they look very similar. Notice the 3 screws holding the hanger in place.

Not sure where this belongs since I cannot find any info on this style frame. Anyone have an idea years made or if it's even a real deal McMahon? Snapped it up for very little money and have started to clean it up, rear-end seems to be anodized and is taking a lot of elbow grease to get the...

I have some extra seat posts that have no bike to fit so I'm willing to do 2 for 1 swap with a US based member. US only due to shipping cost but hey, if the right deal comes forward, you never know. I have 2 Titec post in silver, 26.8 and 27.2 and a silver Race Face XY in 27.0. Looking for a...

I do not. Bike is in Switzerland now. Had exactly that feature with a cable cover, not a housing, over it. Best pic I have of that feature.

96 Ti Canzo just finished. Was all there so really only needed a wipe down and cables/housing. Shock was cracked but somehow I had a matching one that I fully rebuilt so spare parts for that. M739 levers, brakes and Derailleurs. Wheels were replaced with M737 hubs, Mavic 221 rims. Sugino...

Here is a Colorado Legend AT I had for a while so diff geometry than yours, counts that out.

Similar look. I'd say it's genuine.

The rollercams are Suntour, The rest of the bike was M900, mostly takeoff parts so the reason I'm looking for Deerhead for the frame now.

Update on the Wanga. Full XTR now on the bike. Only M950 piece is the RD. Don't have one but looking. So the crankset has a 5 arm spider and not 4 arm, is this aftermarket or an option then?

I should know this but I do not. I got a bike back from my son a few days ago that I had built for him 20 years ago, 1985 Jamis Dakar. Gave him a replacement 1998 Jake the Snake, fits him better than the 26" wheels, 700c on the Jake. So I ripped into the bike stripping it clean for a refresh and...

Looking to find a lonely spacer, the left side one, for this hub. I have a 135mm spacer like in the pic but it needs to be 5mm shorter to fit the frame which is aluminum so cold set is out. I'll swap or buy outright. I'll post in the MTB section as well.

Looking to find a lonely spacer, the left side one, for this hub. I have a 135mm spacer like in the pic but it needs to be 5mm shorter to fit the frame which is aluminum so cold set is out. I'll swap or buy outright. I'll post in the road bike section as well.

Try this link. https://specialtyretroproducts.com/product/avid-tri-align-i-replacement-sleeves/

Picked this beauty up this morning, 40 minute drive from me. 96 in the serial number so assume that's what the model year would be. Fox 5 was cracked but I had one to swap in, now just need to get it serviced because the rebound works too good and takes a bit of time to go back to full extend...

I found an M900 FD for the bike and cabled the brakes and both derailleurs to get the build buttoned up. During the FD cabling I noticed that the cable does not line up with the groove in the swing arm. Did these come with a different FD or maybe a wider BB? I have a 107mm and all looks fine for...

If you happen across 2 of these I could use one as well. Seems a very hard piece to get.

It's a bit disguised, under the T in Team on top tube. There is a very small one on the left that covered much better with the sticker.

I have had this frame for a while and decided it was time to build it. Had a few bruises from the bars swinging into the frame so filled that with Bondo, lol. Grabbed a sticker kit from someone in EU and it looks great. Wheels, brakes and a few other pieces are thanks to another MTBR/Retro Bike...

You are in luck . I do have the part, just pulled off, swapped for an SRP V-brake unit. I have not looked at it for cracks but it is off a lightly used fork, I'll inspect it later today. The only thing I would need in exchange is a right M900 shifter pod intact. Does not have to function but the...

Ok, first go at removal of top coat. Went really well and the "environmentally safe" stripper ( I love those ones) took off the stickers too. Had to reapply stripper many times. Pic is first try. I do have the frame down to bare anodize now and it is glimmering. Post some pics of complete strip...