Wanted XTR M950 rear axle hub cones.

[Spankyfart]

Not sure whoever serviced these wheels but it needs a rebuild with other hub cones.
You can see how bad the bearings are battered and this is in lesser degree also on the (in picture loose) hub cone.

Looking for a replacement to get these on the road again.

 

[hamster]

Hub cones.
Try SJS Cycles.

For bearing balls I use my local trading estate bearing factor for loose balls in the best grade available (typically 10 Grade) - I bought 100 or so a few years ago and am still working my way through them. He also sells online:
https://www.hendersonbearings.co.uk/https://www.hendersonbearings.co.uk...alls-grade-100-1-32-to-25-64-choose-size.html

 

[Spankyfart]

Hub cones, cheers.
Are these just interchangeable as long as they are for 6.35mm bearings?

 

[hamster]

Yes. The grade is the tolerance. Typical Weldtite ones are VERY badly toleranced.

 

[Matttymm]

Both are available on eBay mate - but appreciate shipping and taxes from the US is a killer on price.

I might have a spare hub you can rob if you get stuck.

Drop me a PM if I can help

 

[Spankyfart]

The g/f will be in the US this sept, I'll have a gander on the bay. thanks.

 

[Paul R]

strange theyve done that im sure theyre suppost to be stainless balls in these

 

[Matttymm]

Yes of course 1/4” inch stainless ball bearings. 18 off each side.