XT/DX Skewer Rubber O-Rings

[rwm1962]

double post

 

[rwm1962]

You need to measure the inner diameter & cross section. I would highly recommend VITON or FKM o-rings for this. They are far more resistant to UV light so won't crack & perish the same way.

Still on my do-list. I may do a bigger order via my supplier for a better price so I can offer them here.

 

[Wchow16]

You need to measure the inner diameter & cross section. I would highly recommend VITON or FKM o-rings for this. They are far more resistant to UV light so won't crack & perish the same way.

Still on my do-list. I may do a bigger order via my supplier for a better price so I can offer them here.

Thanks I measured all three points and tried to find a model that matched it as close as possible. Unfortunately the closest I could find, wasn’t a match. I’ll keep track of this post. If you do pick up a set, I would be interested.

Thanks

 

[mdvineng]

Re:

Go for the size smaller on inner diameter and the closest on crossection.

 

[Wchow16]

Re:

Thanks for the tip.

 

[Rank_21]

https://www.ebay.fr/itm/O-Rings-Nitrile ... %3A2334524

 

[Rank_21]

Roughly what I measured using the older cracked rings. I'd like to also replace mine. 4-4,2mm*23mm*14,8mm

 

[Wchow16]

Size 309 is what I am thinking about ordering


https://www.grainger.com/category/hardw ... ters=attrs

 

[GeneralOsik]

For those in the US, I'm pretty sure this is the O Ring you want, if shopping from McMaster Carr:

https://www.mcmaster.com/9263K781/

 

[Gtpulse]

I’ve just ordered 50 14mm ID 4mm cross section for my DX skewers. If they work out ok happy to send them out for the price of a stamp to anyone who needs them.