XT 737 Cantilever brakes

[PeterH]

Front and rear reqd, NOS or good condition with pads if possible.
Thanks.

 

[bontyfiend]

Have you seen these? http://www.retrobike.co.uk/forum/viewtopic.php?t=52485

 

[PeterH]

Thanks. Yes i saw them and i'm pretty certain they have been sold.

 

[MikeC]

Yep, I expect to receive them anyday

Sorry

 

[PeterH]

M737 Cantilever brakes

I'm still looking for these if anyone has a front and rear set complete with dust covers, fixing bolts and hopefully pads.

 

[WindysurfNZ]

Re: M737 Cantilever brakes

I'm still looking for these if anyone has a front and rear set complete with dust covers, fixing bolts and hopefully pads.

Hi Peter, I have taken a set of XT cantilever brakes off my Diamond Back Axis (early/mid 90s), I am pretty certain that they are M737s (silver), will have a look today. Not sure what you mean by dust covers though? I had dust covers on the XT STI shifters? Cheers Ian

 

[PeterH]

M737 Cantilever brakes

Hi Ian. Thanks for the note. 737 canti's were most definately fitted to the DB Axis of that time so i'm hoping you have them. FYI i want the canti's for my DBR Vertex TR.

In the attached pic you can see the dust cover around the fixing bolt, it is black in colour.
Cheers,
Peter.

 

[WindysurfNZ]

HI Peter,
I checked them out this afternoon, and they are BR M734's. I assume this was the XT number for the cantilever brakes as my crankset is XT, and is FC M730.
I wondered what the small black rings were for - I saw one when I got them out this afternoon to take a photo - I will have to check the box to see if there are any more in there. There were some washers, but I assume you can just get those from a hardware store, or motor parts place? Other than that as per the picture.



Cheers
Ian

 

[nporternz]

Ian

if pete passes on these i'll take them!

nic

 

[PeterH]

M737's

Guys. I'm passing on these M734's.
Thnks.