- Feedback
- View
WTD Hope O2/C2 185mm Disc Rotor
- Thread starter EarlofBarnet
- Start date
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
- Feedback
- View
Re:
Thank you for that. No 180mm O2/C2 rotors left though
Thank you for that. No 180mm O2/C2 rotors left though
Re:
Email hope and ask them if they can still make you one. When I enquired last year about a 5 bolt rotor I wanted they just said to place an order with a dealer and they will make it. If you can just get them to confirm what design it is your sorted (and don’t mind paying for new).
Email hope and ask them if they can still make you one. When I enquired last year about a 5 bolt rotor I wanted they just said to place an order with a dealer and they will make it. If you can just get them to confirm what design it is your sorted (and don’t mind paying for new).
- Feedback
- View
Re:
Good shout. Thanks for that.
Good shout. Thanks for that.
Re: Re:
The ones to find are the 0 not the 5mm and flavoured in 5 bolt. Mono/mini you could get 160/180mm 5 bolt for hubs like bulb and big un.
Alternatively finding 6 bolt in 185/165 is difficult too, but it allows you to use the 5 bolt hubs with modern effectively 6 bolt compatible caliperrs.
Not by Hope, be a modern something.boxxer":4tcmdig9 said:
The ones to find are the 0 not the 5mm and flavoured in 5 bolt. Mono/mini you could get 160/180mm 5 bolt for hubs like bulb and big un.
Alternatively finding 6 bolt in 185/165 is difficult too, but it allows you to use the 5 bolt hubs with modern effectively 6 bolt compatible caliperrs.
- Feedback
- View
Re:
Thanks for the replies. It’s for a Goldtec Draco six bolt hub that I’m using on my Sintesi Bazooka. I’m running Hope C2 brakes so thought a matching rotor would be fitting. The rotor in the picture came up when I was searching.
I eyed up an Avid 180mm rotor and it looked about right. I couldn’t mount it though as it wouldn’t fit on to the hub. The six holes looked to line up but the hub seemed a tad too fat to let the disc sit on to the facing.
Thanks for the replies. It’s for a Goldtec Draco six bolt hub that I’m using on my Sintesi Bazooka. I’m running Hope C2 brakes so thought a matching rotor would be fitting. The rotor in the picture came up when I was searching.
I eyed up an Avid 180mm rotor and it looked about right. I couldn’t mount it though as it wouldn’t fit on to the hub. The six holes looked to line up but the hub seemed a tad too fat to let the disc sit on to the facing.
Re: WTD Hope O2/C2 180mm Disc Rotor
I have a disc a per photo, it is a 185mm & was used with a Hope C2 no.3 caliper.
Photos here https://www.dropbox.com/s/o6u9rxd3k3dss ... pg?dl=0not
https://www.dropbox.com/s/1gvdpvp03hlfx ... 0.jpg?dl=0
I have a disc a per photo, it is a 185mm & was used with a Hope C2 no.3 caliper.
Photos here https://www.dropbox.com/s/o6u9rxd3k3dss ... pg?dl=0not
https://www.dropbox.com/s/1gvdpvp03hlfx ... 0.jpg?dl=0
Similar threads
