Wtd - Cannondale Headshok stem - no need any more

[Ompelukone]

Currently running roughly 85 mm at what looks like 45 degrees.

Would like to have roughly similar length, maybe up to 100 mm, but less drastic angle. In black please!

For old fashioned one inch handlebar.

Headshok / Lefty steerer diameter is 1-9/16″, i.e.,1.56", i.e. 39.6875 mm

EDIT:

New plans, no need for this stem any more.

 

[skolioza]

Re:

Hi

Not sure if that's You're after - bought this stem with box of parts, but never own Cdale It is possible, that it never rides in a bike but I'm not sure in 100%
Let me know if it's any good for You

Marcin

 

[Ompelukone]

Re: Wtd - Cannondale Headshok stem

Thanks for the offer!

Unfortunately it looks a bit too long for me. Its difficult to see from the pic. How long is it?

Is it really for the Headshok/Lefty diameter steerer tube? (1 9/16 in = 39.6875 mm)

And yes, I'd like to use my old school (1 in = 25.4 mm) handlebar.

 

[skolioza]

Re: Wtd - Cannondale Headshok stem

Is it really for the Headshok/Lefty diameter steerer tube? (1 9/16 in = 39.6875 mm)

Can't answer, cause I'm not Cdale expert
But I can measure it:
lenght C-C 140-145mm
dia for steerer tube 39,6mm
So looks that is same dia

If You want to try it You can have it for shipping costs (international priority recordered takes 10GBp) - as I wrote it's any use for me
Marcin

 

[Ompelukone]

Re: Wtd - Cannondale Headshok stem

Sorry for the very late response skolioza. My plans have changed, no need for the stem any more.

I'll edit the first post accordingly