Andy145 Dirt Disciple Feb 5, 2012 #1 I've picked up a set of RC36 Evo forks from a mate but they're fitted with a threadless steerer, can a threaded RC35 steerer be fitted to them?
I've picked up a set of RC36 Evo forks from a mate but they're fitted with a threadless steerer, can a threaded RC35 steerer be fitted to them?
ishaw Gold Trader GT Fan Feedback View Feb 5, 2012 #2 Yes indeed. Pace Steerers are pretty generic for pace forks where the steerer can be swapped.
J justbackdated Retrobike Rider Feedback View Feb 6, 2012 #4 Tighten the crown steerer bolts only to 4.5Nm and put some copper grease on them before tightening. Oh, and don't lose your crown race collar
Tighten the crown steerer bolts only to 4.5Nm and put some copper grease on them before tightening. Oh, and don't lose your crown race collar
Andy145 Dirt Disciple Feb 6, 2012 #5 Thanks Justbackdated - 4.5Nm isn't a lot, not sure my torque wrench goes down that far so I shall have to be careful
Thanks Justbackdated - 4.5Nm isn't a lot, not sure my torque wrench goes down that far so I shall have to be careful