Wizard of OZ
Retrobike Rider
- Feedback
- View
Re-inventing an old add. So you may have seen some of these before but heaps of new goodies for your viewing pleasure. All prices include 2nd class postage to the UK. Anything like posting overseas or signed for just ask. If I’m off on price give me a yell. Paypal gift please, or add to cost to cover fees. Dibs on this thread then PM to seal the deal please. Short list below with details & pics following.
LIST
PACE RC130 red bars - £65
Girvin Flexstem XST Titanium bar/stem combo - £65 £55
Girvin Flexstem 28.6 - £12 £8
Onza bar ends £8 £6
V-brake Adapters by World Class NOS - £15 £12
Brake arch converter 26” to 700c pair - £25 SOLD
RockShox MAG Usable but paint on lowers royally stuffed – £40 £25
Odyssey Straddle Rods pair - £15 SOLD
CRUD Cog Hog in Purple NOS – £8 £6 SOLD
CRUD Claw 7sp & 8SP NOS - £8 £6
Tioga Clipman SPD style pedals with cleats NOS - £25
Suntour Power FLO cassette NOS - £15 £10
Suntour MD8s rear hub NOS - £35 £28
Suntour XC Pro front hub NOS - £20 £15
Red Pace stem - £35 £30
Silver Pace stem - £35 SOLD
STX RC front and rear hubs - £28 SOLD
Brass nipples 72no - £5 £2
STX chain ring set - £10 SOLD
KoolStop Avid ceramic v-brake pads NOS - £8 £5
DETAILS & PICS - Will get missing photos up tomorrow.
PACE RC130 red bars
Unmolested, so original length. Box is damaged. The bar end caps are not inserted but look to have been. When I bought it I had thought to have gotten hold of NOS but there is fading that looks to be typical of controls/stem/grips mounting. I think they have been taken off a display bike but you never know. Fading is not as noticeable as in the pics. Look fantastic though. And once mounted is as close to NOS as you’ll get for a set of these.
Untitled by Kean5000, on Flickr
Untitled by Kean5000, on Flickr
Untitled by Kean5000, on Flickr
Untitled by Kean5000, on Flickr
Girvin Flexstem XST Titanium bar/stem combo
1 & 1/8th quill stem, 135mm reach and slight rise 3 to 5 deg by my eye & with 5ish deg back sweep to 515mm wide bars. I have a selection of bushings. It has a red bushing (hard – used but only buy me) currently installed. I also have one green (soft – might have been used but looks new) & a blue one (very hard – looks NOS but dirty). All in great nick with no splits to them. You can choose which one it will come with. An extra fiver for the other two if you want them with the Flexstem. These will be sold separately if left over when the bar/stem is gone. The bar stem is in reasonable condition with no cracks or bent bits. Has some scuffs & markings but being titanium could be polished out if you really wanted. There however is some small deformations at the ends of the bars where someone has obviously put some bar ends on but no big problems. On my kitchen scales is 580g all up. With the 515mm width someone has also cut the thing down from its original 22inches/560mm. So period correct then. Very clean look when on the bike with controls. So if you would like to reduce the direct steering of your ridged steed in favour of some anti-vib bling. This is for you!
Girvin Flexstem 28.6
NO BUSHING, canti hanger. Could use new paint.
Onza bar ends
In sliver & quite light. They are well use with scratches on the outer edges with the logos faded. End plugs are still in reasonable nick. Have a nice little detail that no one notices - the clamp bolts are drilled through the centre to make them super light.
V-brake Adapters by world Class NOS
These things allow you to use your ubër-expensive CNC’d-artwork cost-a-fortune cantilever specific levers with these fan dangled new liner pull V-brakes. They say that they are for XT or LX V-brakes but look at diagram on back of packet to be sure they will fit your Vs.
RockShox MAG 21. Usable but paint on lowers is stuffed
I got these with a Parkpre Pro frame I bought. Looks to be ’96 version (as is the Parkepre) but someone can tell me otherwise. The previous owner has attempted to strip the paint off the lowers. So one leg has had paint striper on it with a section that is rubbed back to the bare MAG. On doing this they discovered what must have been a lovely Klein?? fade paint scheme. So they rubbed the second leg back just to be sure. :facepalm: Just taking off the black home spray job to see what the now ruined second leg original paint looked like. What a waste. Was probably a set that came on a Pulse or the like. At least they were not the ones that sprayed them black. Anyway, rant over. The good news as they appear to work pretty sweet. Some very slight wear on the sliders but only just. They feel great when you depress them, with no stiction on the rebound. Dials seam to work and are not stiff. I have not ridden them so all this is just the typical ‘put my weight on them workshop test.’ Nice working pair for a full paint job or winter hack that wants sorted suspension just as they are. Would like to keep them for rainy day but would just lead to another project. 1&1/8 steerer. Length is 127mm with 25mm threaded. No gattors.
CRUD Claw 7sp & 8sp NOS
A comb for your cassette. For the cassette that has everything. Spoil it.
20140926_112711 by Kean5000, on Flickr
Tioga Clipman SPD style pedals with cleats NOS
In lovely Tioga blue. Some chips in the paint sorry due storage.
20140926_112830 by Kean5000, on Flickr
Suntour PowerFLO cassette NOS
8sp 11-28 APII. Never seen a chain.
20140926_112117 by Kean5000, on Flickr
Suntour MD8s rear hub NOS
135mm O.L.D. 36 hole, will take the cassette above. Has a few marks from storage but never been laced. Although new bearing feel a bit dry but the fee hub is smooth. Has IG stamped on the body
20140926_112221 by Kean5000, on Flickr
20140926_112244 by Kean5000, on Flickr
20140926_112310 by Kean5000, on Flickr
Suntour XC Pro front hub NOS
100mm O.L.D 36 hole. With the WTB grease guard system. Beautiful.
20140926_112326 by Kean5000, on Flickr
20140926_112334 by Kean5000, on Flickr
Red Pace stem
120mm x flat as a tac. For normal bars. Red ano is generally good apart for some scratching on top the stem at the bar clamp.
Brass nipples 72no
Came off the wheel set above. So been laced into wheels that were not used.
KoolStop Avid ceramic v-brake pads NOS
No pins sorry, just a set of pads in the open packet. For Type-1 Avid cartridges only. Found on their first generation V-brakes.
LIST
PACE RC130 red bars - £65
Girvin Flexstem XST Titanium bar/stem combo - £65 £55
Girvin Flexstem 28.6 - £12 £8
Onza bar ends £8 £6
V-brake Adapters by World Class NOS - £15 £12
Brake arch converter 26” to 700c pair - £25 SOLD
RockShox MAG Usable but paint on lowers royally stuffed – £40 £25
Odyssey Straddle Rods pair - £15 SOLD
CRUD Cog Hog in Purple NOS – £8 £6 SOLD
CRUD Claw 7sp & 8SP NOS - £8 £6
Tioga Clipman SPD style pedals with cleats NOS - £25
Suntour Power FLO cassette NOS - £15 £10
Suntour MD8s rear hub NOS - £35 £28
Suntour XC Pro front hub NOS - £20 £15
Red Pace stem - £35 £30
Silver Pace stem - £35 SOLD
STX RC front and rear hubs - £28 SOLD
Brass nipples 72no - £5 £2
STX chain ring set - £10 SOLD
KoolStop Avid ceramic v-brake pads NOS - £8 £5
DETAILS & PICS - Will get missing photos up tomorrow.
PACE RC130 red bars
Unmolested, so original length. Box is damaged. The bar end caps are not inserted but look to have been. When I bought it I had thought to have gotten hold of NOS but there is fading that looks to be typical of controls/stem/grips mounting. I think they have been taken off a display bike but you never know. Fading is not as noticeable as in the pics. Look fantastic though. And once mounted is as close to NOS as you’ll get for a set of these.
Untitled by Kean5000, on FlickrUntitled by Kean5000, on FlickrUntitled by Kean5000, on FlickrUntitled by Kean5000, on FlickrGirvin Flexstem XST Titanium bar/stem combo
1 & 1/8th quill stem, 135mm reach and slight rise 3 to 5 deg by my eye & with 5ish deg back sweep to 515mm wide bars. I have a selection of bushings. It has a red bushing (hard – used but only buy me) currently installed. I also have one green (soft – might have been used but looks new) & a blue one (very hard – looks NOS but dirty). All in great nick with no splits to them. You can choose which one it will come with. An extra fiver for the other two if you want them with the Flexstem. These will be sold separately if left over when the bar/stem is gone. The bar stem is in reasonable condition with no cracks or bent bits. Has some scuffs & markings but being titanium could be polished out if you really wanted. There however is some small deformations at the ends of the bars where someone has obviously put some bar ends on but no big problems. On my kitchen scales is 580g all up. With the 515mm width someone has also cut the thing down from its original 22inches/560mm. So period correct then. Very clean look when on the bike with controls. So if you would like to reduce the direct steering of your ridged steed in favour of some anti-vib bling. This is for you!
Girvin Flexstem 28.6
NO BUSHING, canti hanger. Could use new paint.
Onza bar ends
In sliver & quite light. They are well use with scratches on the outer edges with the logos faded. End plugs are still in reasonable nick. Have a nice little detail that no one notices - the clamp bolts are drilled through the centre to make them super light.
V-brake Adapters by world Class NOS
These things allow you to use your ubër-expensive CNC’d-artwork cost-a-fortune cantilever specific levers with these fan dangled new liner pull V-brakes. They say that they are for XT or LX V-brakes but look at diagram on back of packet to be sure they will fit your Vs.
RockShox MAG 21. Usable but paint on lowers is stuffed
I got these with a Parkpre Pro frame I bought. Looks to be ’96 version (as is the Parkepre) but someone can tell me otherwise. The previous owner has attempted to strip the paint off the lowers. So one leg has had paint striper on it with a section that is rubbed back to the bare MAG. On doing this they discovered what must have been a lovely Klein?? fade paint scheme. So they rubbed the second leg back just to be sure. :facepalm: Just taking off the black home spray job to see what the now ruined second leg original paint looked like. What a waste. Was probably a set that came on a Pulse or the like. At least they were not the ones that sprayed them black. Anyway, rant over. The good news as they appear to work pretty sweet. Some very slight wear on the sliders but only just. They feel great when you depress them, with no stiction on the rebound. Dials seam to work and are not stiff. I have not ridden them so all this is just the typical ‘put my weight on them workshop test.’ Nice working pair for a full paint job or winter hack that wants sorted suspension just as they are. Would like to keep them for rainy day but would just lead to another project. 1&1/8 steerer. Length is 127mm with 25mm threaded. No gattors.
CRUD Claw 7sp & 8sp NOS
A comb for your cassette. For the cassette that has everything. Spoil it.
20140926_112711 by Kean5000, on FlickrTioga Clipman SPD style pedals with cleats NOS
In lovely Tioga blue. Some chips in the paint sorry due storage.
20140926_112830 by Kean5000, on FlickrSuntour PowerFLO cassette NOS
8sp 11-28 APII. Never seen a chain.
20140926_112117 by Kean5000, on FlickrSuntour MD8s rear hub NOS
135mm O.L.D. 36 hole, will take the cassette above. Has a few marks from storage but never been laced. Although new bearing feel a bit dry but the fee hub is smooth. Has IG stamped on the body
20140926_112221 by Kean5000, on Flickr20140926_112244 by Kean5000, on Flickr20140926_112310 by Kean5000, on FlickrSuntour XC Pro front hub NOS
100mm O.L.D 36 hole. With the WTB grease guard system. Beautiful.
20140926_112326 by Kean5000, on Flickr20140926_112334 by Kean5000, on FlickrRed Pace stem
120mm x flat as a tac. For normal bars. Red ano is generally good apart for some scratching on top the stem at the bar clamp.
Brass nipples 72no
Came off the wheel set above. So been laced into wheels that were not used.
KoolStop Avid ceramic v-brake pads NOS
No pins sorry, just a set of pads in the open packet. For Type-1 Avid cartridges only. Found on their first generation V-brakes.
