Which brake model to Use for GIANT ATX One DH?

DaHaoZ

Retro Newbie
Hello everyone. I just bought a Giant ATX One DH frame. I think is an earlier model, because its brake mount is "inside" the rear angle. Please find below the picture.

I had an in depth search on the web. This earlier model should be equipped with a Hope C2 brake. But I know that C2 has many types of "Numbers", from 1 to 11, which made me very difficult to choose.

Is there anyone who could tell me which "Number" of the C2 brake caliper should I choose for my GIANT ATX One DH?

Thank you very much in advance.

Howard
 

Attachments

  • Weixin Image_20240222191507.jpeg
    Weixin Image_20240222191507.jpeg
    208 KB · Views: 768
  • caliper1.jpeg
    caliper1.jpeg
    8 KB · Views: 9
  • caliper2.jpeg
    caliper2.jpeg
    9.4 KB · Views: 6
  • caliper3.jpeg
    caliper3.jpeg
    9.4 KB · Views: 6
  • caliper4.jpeg
    caliper4.jpeg
    6.9 KB · Views: 6
  • caliper5.jpeg
    caliper5.jpeg
    9.7 KB · Views: 5
  • caliper6.jpeg
    caliper6.jpeg
    7.1 KB · Views: 5
  • caliper7.jpeg
    caliper7.jpeg
    8 KB · Views: 9
If the mounting holes are 51mm apart you'll need either a no3 or no5 depending on disc diameter.
Thank you very much, Jacques. The measurement between the two mounting holes are about 43mm on my bike, not the international standard, 51mm. Do you know which type of caliper shall I choose? No.3?
 
I found a picture from the web, it looks like the caliper No.1. Please correct me if I am wrong.
 

Attachments

  • mobile01-19e263d08c633a83d94080b467358cb1.jpg
    mobile01-19e263d08c633a83d94080b467358cb1.jpg
    38 KB · Views: 8
Could it be a Formula mount, rather than IS? Check the hole diameter, M5 would be Formula, M6 would indicate IS.
 
Back
Top