Which brake model to Use for GIANT ATX One DH?

DaHaoZ

Retro Newbie
Hello everyone. I just bought a Giant ATX One DH frame. I think is an earlier model, because its brake mount is "inside" the rear angle. Please find below the picture.

I had an in depth search on the web. This earlier model should be equipped with a Hope C2 brake. But I know that C2 has many types of "Numbers", from 1 to 11, which made me very difficult to choose.

Is there anyone who could tell me which "Number" of the C2 brake caliper should I choose for my GIANT ATX One DH?



Thank you very much in advance.

Howard
 

Attachments

  • Weixin Image_20240222191507.jpg
    Weixin Image_20240222191507.jpg
    208 KB · Views: 5
  • caliper1.jpg
    caliper1.jpg
    8 KB · Views: 5
  • caliper2.jpg
    caliper2.jpg
    9.4 KB · Views: 1
  • caliper3.jpg
    caliper3.jpg
    9.4 KB · Views: 1
  • caliper4.jpg
    caliper4.jpg
    6.9 KB · Views: 1
  • caliper5.jpg
    caliper5.jpg
    9.7 KB · Views: 1
  • caliper6.jpg
    caliper6.jpg
    7.1 KB · Views: 1
  • caliper7.jpg
    caliper7.jpg
    8 KB · Views: 1
  • 截图20240222151503.png
    截图20240222151503.png
    26.5 KB · Views: 5
IIRC the early ones were Hope No.1 caliper fitment as that was 'the standard' at the time, although I can't remember if this equated to a 155mm or 165mm rotor. Later ones took the IS style and these mounts would have meant No.3 for a 165mm rear, or No.8 for a 185mm. That No.8 was only from the Pro Enduro 4 and on though from early 2001. That was the lighter replacement for the DH4 which had never been available in a No.8, and for your case, neither was it available for the C2 either.
 
Back
Top