Wheels for your wagon......

[LikeClockwork]

Got a fair few wheels I need to shift - before I bother taking too many pics and down sizing them, etc, going to judge if there's the slightest bit of interest.

Postage is a pain due to size and lack of access to boxes, etc, any more. I have to use ParcelForce 48, which is at least another £13. But I accept most couldn't collect so maybe factor in another tenner on top for postage, or can meet off the A303, Somerset/Podimore services area......

Red GoldTec hubs on black Mavic F519 rims, butted DT spokes. Sound good, huh...? Not really. Hubs faded to a fetching pink. Front is smooth and usable, rear hub is in my humble opinion completely shot, as there's tons of play and appears to be something missing. Rims are both great still, front one slightly more so than rear, so you could perhaps use the rim/spokes off rear to rebuild another wheel...?
Anyway, will get pics if any interest.........£30 ON HOLD

Surly single speed rear wheel for screw on cassette, standard 135mm, bolts up. Rim is silver 26" Mavic XC717, 32H, eyeletted, for rim brake only. Could very well be new by the looks of it......£30 ON HOLD


SOLD:

STX RC hubs on F.I.R. black(ish) rims, rear rim has gone a bit 'bronze' for some reason. Hubs smooth, think spokes are DT again. Will take 8/9 speed as that's what's on there. Just the wheels, no QR's/tyres/cassette, ignore them in the pics ......£30

Black Deore hub on black Mavic EX325 disc rim, silver DT spokes, 160mm rotor fitted, Kore rim tape. Again, could easily be new by the looks of it.....£25

 

[oldave]

"STX RC hubs on F.I.R. black(ish) rims, rear rim has gone a bit 'bronze' for some reason. Hubs smooth, think spokes are DT again. Will take 8/9 speed as that's what's on there."

Much life left in the brake tracks? 135mm oln? If so, probably interested.

 

[mk one]

Yes interested in the Goldtecs, pending pics please

Mark

 

[LikeClockwork]

Re:

Plenty of life left I would say Dave, presume standard 135mm, yes, as they've been in a couple of bikes of mine that were that! I'll treble check when I can get to them later, here's a couple more pics I took the other day when someone thought they wanted them....

 

[LikeClockwork]

Yes interested in the Goldtecs, pending pics please

Mark

Give me an hour or so Mark, and I'll try and get some pics before the light goes....currently trying to list things on eBay so a bit distracted! (Fee deal, so got to be done.... )

 

[mk one]

Yes interested in the Goldtecs, pending pics please

Mark

Give me an hour or so Mark, and I'll try and get some pics before the light goes....currently trying to list things on eBay so a bit distracted! (Fee deal, so got to be done.... )

Hey, no rush whenever you can, in the week is fine if you dont have time today

 

[LikeClockwork]

Re:

Managed it! Sorry, didn't realise they were so dirty. Spokes are definitely DT.

 

[oldave]

"Plenty of life left I would say Dave, presume standard 135mm, yes,...."

Thanks. I'll take the STX on FIRs please then. PM incoming.

 

[ishaw]

Re:

Up for a challenge in terms of the goldtech wheels if they don't sell to mkone.

 

[LikeClockwork]

Re:

Noted, Ian....

Did have the rear hub apart at some point in my mate's bike shop, but can't remember the exact outcome. Think the issue was that the parts are all specific to GoldTec. Could probably be sourced, but only at a price. Rebuild onto nice Hope would have been my first choice, but haven't the time or inclination....