What model is my Pace RC200

[tch911]

I am about to sell my RC200, can anyone identify which model of RC200 it is?

http://www.retrobike.co.uk/forum/viewto ... p;t=305842

It is a disc frame with canti mounts as well
Bolt on seat clamp.
Gunmetal anodised finish

Apart from that, not much that leaps out.

Thanks

 

[RickTheUncivil]

serial number will help, and cross reference against the pace serial numbers thread on here somewhere, it has an index of serial numbers against model, just find where yours fits in.

i think disc mounts were f6 onwards but not certain

 

[danson67]

Here's the serial number thread:
http://www.retrobike.co.uk/forum/viewto ... mp;t=20895

And the list on Google Drive:
https://docs.google.com/file/d/0BzbvWEu ... edit?pli=1

Serial number is stamped on the underside of the BB shell.
You might have to take the cable guide off to see if fully.

All the best,

 

[rc200]

Frame no. should start F* (6/7/.
Looks like an F6 that's had an Fi disc mount added.
F8's had triple butted top and down tubes and butted head tube and bottom bracket shell and seat stay disc mount and canti mounts.
F7's had double butted top and down tubes, can't remember what the bb shell and head tube were like but they had a chain stay mounted non IS disc mount and canti mounts.
F6's had db top and down tubes, plain head tube and bb shell, bolt on canti cable stop on wishbone and bolt at bottom of seat tube for an e type front mech. Can't remember if mine had additional bolts on the wishbone and seat stays for the original rear crud guard as my previous F5 had.

 

[WandsworthRouleur]

Re:

Unless you added new stickers and head tube badge, I'm going for an F7. Very nice looking bike, anyway!

 

[FluffyChicken]

The only Pace with a disc tab there as standard is the RC200 F8

But then it would have tubing as mentioned above

 

[rc200]

Pace did update frames and offered to add an F8 disc mount to my F6

 

[FluffyChicken]

Pace did update frames and offered to add an F8 disc mount to my F6

I was backing you up

Frame number is normally the tell all for these as you mention.

 

[rc200]

Sorry, only saw the 1st picture and line of text when I looked this morning, it was early, I must have still been asleep