mr_skinny
Orange 🍊 Fan
I'm after two axle/dropout spacers with the serrated grippers for Hope's old Ti suspension hub (circa '95/96) - the standard beefy hub not the huge Fatso one.
From memory there were two styles - simple one with a grub screw to nip the axle or push on with o-ring that had a wide end to cover the cartridge bearing in the hub body.
Not fussed on the style just two the same and cosmetically excellent - the ones I've removed are mashed up!
Measurements end to end (including gripper) are 8mm and ID is 12mm
Cheers!
From memory there were two styles - simple one with a grub screw to nip the axle or push on with o-ring that had a wide end to cover the cartridge bearing in the hub body.
Not fussed on the style just two the same and cosmetically excellent - the ones I've removed are mashed up!
Measurements end to end (including gripper) are 8mm and ID is 12mm
Cheers!
