Wanted: Old cassette which includes a 15t cog in it

[orange71]

Anybody got an old cassette lying around they'd part with for very little money which has a 15t cog in it? Needs to be one of those cassettes you can take apart to clean (i.e. has those 3 pins you can unscrew and the cogs/spacers come apart.

I think a 7 speed one is more likely to have 15t as all my 8 speed have 14t and 16t next to each other, but the one 7 speed one I have has a 15t (though is too knackered to use!).

Needed for my single speed project. Like the three bears' porridge 16t is just too low, 14t too high...but 15t would be *just* right

Thanks!

 

[letmetalktomark]

Hi Orange71

I'll check mine and let you know

http://www.retrobike.co.uk/forum/viewtopic.php?t=12849

 

[aljsk8]

i might have one - ill have a look tonight - the cassettes i have are already apart so it would just be the cog if i have it (and there already clean)

bear in mind that the cassette cogs have low teeth which isn't ideal for single speed

ill keep you posted

Alex

 

[orange71]

Thanks both - look forward to hearing from you. I'm already running a 16t from a cassette which seems to work ok, so I'll risk it.

cheers.

 

[aljsk8]

ive had a look and ive got one!

like i said the teeth are pretty low, its ramped for shifting
and its a cheep stamped one - but on the good side there isnt much
wear and its nice and clean

send me an address and ill post it off to you

Alex

 

[aljsk8]

forgot to mention

you can pm me

or my email is aljsk8 (at) hotmail (dot com)

used the (at) and (dot com) to stop the internet robots spamming me
but you know what it should be

Alex