wanted marzocchi stantions or dead fork 30mm

[Lukem9962]

hi i have a set of z1 with cracked stantion anyone got any dead or messed up forks i can be usefull ?>

 

[shedobits]

Re:

Hi, I have some Z1's from 2001, they have been working on my Inbread for about 3 years now. I replaced the seals so they are oil tight and work fine with only the rebound adjuster needing attention. The stantions are marked but don't affect performance. They should have 130 travel but I've never got better than 110. They are much better than spares or repair with a 510 A to C and a 185 steerer.
They have just had an oil change and are being used as backup whilst my other forks are away being repaired.
How about £20 plus postage? The bad news is that the last pair of forks I posted to UK cost me £30.
Let me know if you're interested and I'll get a firm price.

 

[Lukem9962]

Re:

i would be interested depending on price with shipping check here https://www.p2g.com/es/ i got someone to send me a wheel via them it was less than 10gpb

 

[shedobits]

Re:

How about £50 posted? They come with the 20mm axle and a spare set of decals.

 

[Lukem9962]

Re:

Do you have a picture at all ? 50 isn't bad with the 20mm version

 

[shedobits]

Re:

I'll do some close ups in the morning and post them in the evening.

 

[Lukem9962]

Re: Re:

I'll do some close ups in the morning and post them in the evening.

awsome that will be great one of the bolts on the bottom would be good to becuase i have a plan thanks alot

 

[shedobits]

Re:

As promised here are the pics, you wont win BOTM with these but they do work, [the Toyota Hilux of forks I think].









Let me know if you need anymore info.