WANTED - 1" threaded forks

[daccordimark]

To help my Daccordi restoration I'm after some 1" threaded forks. Ideally they need to be Columbus SL or SLX (I think the fork blades were the same actually) and preferably chrome plated. Steerer length needs to be about 160mm. Close clearance, no mudguards eyes etc.

Has anybody got anything suitable?

Cheers,
Mark.

 

[wired99]

I have some nice chrome Coppi forks, sloping crown, only 150mm steerer though?
Any good?

 

[dkmike]

http://cgi.ebay.co.uk/APREBIC-CRO-MO-1- ... 950382f803

 

[daccordimark]

I have some nice chrome Coppi forks, sloping crown, only 150mm steerer though?
Any good?

Just measured up and the head tube is 127mm so in fact I'll need more like 170mm.

 

[daccordimark]

http://cgi.ebay.co.uk/APREBIC-CRO-MO-1-THREADED-CHROMED-RACING-FORKS-/370476968087?pt=UK_sportsleisure_cycling_bikeparts_SR&var=&hash=item950382f803

These look good but being fussy, I don't think straight forks would be right.

 

[legrandefromage]

I have some forks, chrome, 1" steerer, about 200mm with long threaded section.

They are from a Koga Myata, they are fine but sadly too short for what I needed them for.

If interested, I'll put up pics and exact measurements later today.

Price will be around £25 posted

 

[daccordimark]

I have some forks, chrome, 1" steerer, about 200mm with long threaded section.

They are from a Koga Myata, they are fine but sadly too short for what I needed them for.

If interested, I'll put up pics and exact measurements later today.

Price will be around £25 posted

These could be just the job. Yes please to pics etc.

Mark.

 

[legrandefromage]

Forks are 195mm from where the crown race sits to the tip of the steerer.

Useable thread is 40mm

 

[daccordimark]

It looks like there's about 20mm of non-chromed steerer without threads which should be perfect. I can get that thread extended downwards and then chop off the excess.

How do you want the money - Paypal?

Cheers,
Mark.