Guinessisgoodforyou
rBotM Winner
Lovely 
Vintage French randonneuer's and porteurs.
- Thread starter Guinessisgoodforyou
- Start date
What about bars with less drop and reach?
www.hubjub.co.uk
But I'd say 'flat' but swept back bars are still pretty in keeping
www.hubjub.co.uk
But ultimately its the riders choice, you feel comfortable, you wanna ride.
Nitto B135 AA Randonneur
The design resembles a conventional drop except that the ends of the flat sweep gently upwards splaying the bends slightly outwards and allowing one
But I'd say 'flat' but swept back bars are still pretty in keeping
Nitto B347 Dove
The B347 Dove is a sort of North Road handlebar from the Nitto stable It s a good bar and is narrow making it perfect for city riding Broader
But ultimately its the riders choice, you feel comfortable, you wanna ride.
LondonClassic
Retro Guru
My other half's 3 speed Motoconfort. Dealer sticker for St. Pol sur Mer, a suburb of Dunkirk - just across the water from us - where the lady who sold it to us bought it in a charity shop.
Guinessisgoodforyou
rBotM Winner
Very nice
Guinessisgoodforyou
rBotM Winner
Narcisse Hellenic, fillet brazed randonneur, looks to be 1950s with the style and equipment fitted.
Guinessisgoodforyou
rBotM Winner
Not quite a randonneur but an interesting stayer. A good photo of the two men with Mr Derossi in the middle. Circa1926. Note the taped to the rim rear tyre.
Guinessisgoodforyou
rBotM Winner
An unknown randonneur with the Derossi system. Translation below.
Here's a bike which is equipped with the Derossi gear multiplier. It's a very special system, if not brilliant.
To sum up, it's a system that, by adding 2 reduction cogs, allows :- either to have enormous development without having a very large bottom bracket. (I assume chainwheel size, gigfy) or, on the contrary, to have a very small development
As in this case, (If not mistaken, author) to be able to quickly change the development of your machine by only changing the intermediate cog, fixed to the base tube (Chain stay? gigfy). This base tube also has an oblong hole that allows the axle of this extra pair of pinions to be moved. If this oblong hole was used to tension the chain, then it is likely that the change was made for the pair of intermediate sprockets and not just one. By removing just one bolt, you could then prepare your machine for a ride in Beauce or the Pyrenees.
I'll have to take the system apart to confirm these points.
This Derossi system was patented around 1927. There are no visible marks on the bike. It has been completely stripped by the previous owner. I didn't see any holes on the steering column to accommodate a brand plate. The Cyclo derailleur, which looks to be original from the welding of the lugs on the down tube, must date from the late 1920s or early 1930s (Cyclo derailleur specialists will be able to clarify or correct this if necessary). The rear light, on the other hand, looks more recent to me.
Here's a bike which is equipped with the Derossi gear multiplier. It's a very special system, if not brilliant.
To sum up, it's a system that, by adding 2 reduction cogs, allows :- either to have enormous development without having a very large bottom bracket. (I assume chainwheel size, gigfy) or, on the contrary, to have a very small development
As in this case, (If not mistaken, author) to be able to quickly change the development of your machine by only changing the intermediate cog, fixed to the base tube (Chain stay? gigfy). This base tube also has an oblong hole that allows the axle of this extra pair of pinions to be moved. If this oblong hole was used to tension the chain, then it is likely that the change was made for the pair of intermediate sprockets and not just one. By removing just one bolt, you could then prepare your machine for a ride in Beauce or the Pyrenees.
I'll have to take the system apart to confirm these points.
This Derossi system was patented around 1927. There are no visible marks on the bike. It has been completely stripped by the previous owner. I didn't see any holes on the steering column to accommodate a brand plate. The Cyclo derailleur, which looks to be original from the welding of the lugs on the down tube, must date from the late 1920s or early 1930s (Cyclo derailleur specialists will be able to clarify or correct this if necessary). The rear light, on the other hand, looks more recent to me.
Guinessisgoodforyou
rBotM Winner
Charles Pellissier randonneur with twin laterals @Imlach 
Translation below.
I travelled 500 km there and back to pick up this slightly rusty bike (This sounds a little too familiar gigfy) . I came across a very nice couple who told me that when they bought the barn next door, they discovered this bike that had been in storage for years. It's going to be cleaned, greased and kept in its original condition.
This is my 4th bike from the Pélissier brothers.
Translation below.I travelled 500 km there and back to pick up this slightly rusty bike (This sounds a little too familiar
gigfy) . I came across a very nice couple who told me that when they bought the barn next door, they discovered this bike that had been in storage for years. It's going to be cleaned, greased and kept in its original condition.This is my 4th bike from the Pélissier brothers.
