Very thin cassette spacer...

[jez-4-bikes-max]

Goldtec cassette rattles about a bit. Need a super thin (1mm I reckon) spacer to pop at the end of the cassette to let the thingie bind down and make it tight.

Anyone help?

 

[manitou916]

[removed]

 

[kona kid]

one came on my XT 737 cassette held in place by a plastic collar - I need it but some one else might have a spare?

 

[jez-4-bikes-max]

Ill have a look!

 

[kona kid]

another solution would be to use a few of those razor blade like washers that come under the lock ring, instead of having one use 3 or something?

 

[younggeoff]

very thin spacer.

a 1mm bottom bracket spacer works a treat, had same problem put on hub before cassette and solved problem.

 

[leeww]

I have a couple which I could send you, but to tell the truth I have always ran a homemade gear set up/cassette of 1x5 - and when I need one of these spacers I just go to any bike shop with a mechanic and ask for one, they usually have a box or two of spacers hanging around and often will give you one or two for free.

 

[jez-4-bikes-max]

Ah cool.

I dont get time to shoot the the lbs most of the time I'll have another look in my box of bitz and see if I can bodge it!

 

[leeww]

Here you go, I dug out two both around 1mm thick, they are yours if you want.

 

[jez-4-bikes-max]

Awesome pm on its way!