VARIOUS NOS/USED VINTAGE CAMPY SHIMANO OFMEGA 3T COMPONENTS

Re: VARIOUS NOS/USED VINTAGE CAMPY SHIMANO LOOK TIME COMPONE

Slightly Used Shimano 105 Rear Derailleur Short Cage w/ A Slight Blemish As You Can See In One Of the Pictures

##Compatible with 9- or 10-speed Shimano drivetrains
##Not compatible with Dura-Ace 8-speed shifters
##Large 11-tooth pulleys with sealed bearing for smooth, quiet running
##Weight: 228.0 g
##Short Cage

$45.00 obo
$9.00 Shipping To The UK
 

Attachments

  • 105 2.jpg
    105 2.jpg
    52 KB · Views: 332
  • 105 1.jpg
    105 1.jpg
    58.4 KB · Views: 332
  • 105 0.jpg
    105 0.jpg
    63.7 KB · Views: 332
Re: VARIOUS NOS/USED VINTAGE CAMPY SHIMANO LOOK TIME COMPONE

Ofmega Premier Rear Derailleur In Rough Condition But Fully functional! The Info Below Came Off Of The DISRAELI GEARS UK WebSite. This One Is On eBay UK;
http://www.ebay.co.uk/itm/Rare-NOS-Vint ... 51b7f2697b
So My Price Is Pretty Good I Think?

$30.00 obo
$9.00 Shipping To The UK


I think that the Ofmega Premier was the classiest Italian derailleur of the mid 1980’s.

By the standards of Italian manufacturers it used a relatively advanced geometry, being essentially a derivative of the Shimano Crane. In terms of geometry, only the Rino could claim better and Campagnolo could not get close.

However the construction and finish of the Premier are in a different class from Rino - this is Campagnolo quality with precise castings polished to a beautiful pearly finish. There are sealed bearings in the pulley wheels and good chrome on the small parts. I particularly like the sand blasted panels and the raised ridge that protects the adjustment screws. Like the Gipiemme Exploit a decade later, it is slightly mysterious how such a finely made derailleur could suddenly appear and then, a few years later, simply disappear again.

A wee beauty.
•Brand: Ofmega
•Country: Italy
•Date of introduction: 1984
•Date of this example: unknown
•Model no: 0520?
•Weight: 221g
•Maximum cog: 28 teeth?
•Total capacity: 24 teeth?
•Pulley centre to centre: 46mm
•Index compatibility: friction
•Chain width: 3/32”
•Logic: top normal
•Pivots: two sprung pivots
•Material: aluminum

 

Attachments

  • Ofmega Premier 3.jpg
    Ofmega Premier 3.jpg
    54.2 KB · Views: 327
  • Ofmega Premier 2.jpg
    Ofmega Premier 2.jpg
    59.2 KB · Views: 327
  • Ofmega Premier 1.jpg
    Ofmega Premier 1.jpg
    60.1 KB · Views: 327
  • Ofmega Premier 0.jpg
    Ofmega Premier 0.jpg
    56.6 KB · Views: 327
  • Ofmega Premier.jpg
    Ofmega Premier.jpg
    55.4 KB · Views: 327
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Re: VARIOUS NOS/USED VINTAGE CAMPY SHIMANO OFMEGA 3T COMPONE

Very Nice Condition Shimano FD-A105, 105 Golden Arrow Front Mech. It's To Be Used With A Double Chain Ring And The Clamp Is 28.6mm. It Weighs 113 Grams And Is In Full Working Order

$30.00 obo
$7.00 Shipping To The UK
 

Attachments

  • Shimano FD-A105 Front Mech 3.jpg
    Shimano FD-A105 Front Mech 3.jpg
    55.3 KB · Views: 317
  • Shimano FD-A105 Front Mech 2.jpg
    Shimano FD-A105 Front Mech 2.jpg
    54.9 KB · Views: 317
  • Shimano FD-A105 Front Mech 1.jpg
    Shimano FD-A105 Front Mech 1.jpg
    48.3 KB · Views: 317
  • Shimano FD-A105 Front Mech .jpg
    Shimano FD-A105 Front Mech .jpg
    57.7 KB · Views: 317
Re: VARIOUS NOS/USED VINTAGE CAMPY SHIMANO OFMEGA 3T COMPONE

We Are Talking Old School Here Folks With This Shimano Thunder Bird GTO Front Mech From 1974. The Clamp Size Is 25.4mm But You Can Use A 28.6mm Clamp If You Have One. It Weighs 185 Grams.

$30.00 obo
$7.00 Shipping To The UK[/
size]
 

Attachments

  • Shimano Thunder Bird GTO 1.jpg
    Shimano Thunder Bird GTO 1.jpg
    47.2 KB · Views: 314
  • Shimano Thunder Bird GTO.jpg
    Shimano Thunder Bird GTO.jpg
    62 KB · Views: 314
Back
Top