raidan73
Moderator
Archivist
Retrobike Rider
BoTM Triple Crown
BoTM Winner
Gold Trader
PoTM Winner
98+ BoTM Winner
Rocky Mountain Fan
Brodie Fan
- Feedback
- View
Everything in this thread is free to anyone who can collect, or I will send for the cost of postage.
1. Probably only useful as an add on if you're taking something else but I have a load of various branded ahead stem top caps (Both GT ones, red Trek one, top left Kona, bottom row Kona, Cube, Marin and TA are taken), crank bolts and some Zefal pump clips (more pump clips than those pictured). Shown below in the first three pics on this post
2. Christophe toe clips
3. Unknown black plastic toe clips, more road style than MTB
4. Gripshift SRT500R 3x8 speed. Working fine but grips are filthy and covers are worn
5. Kalloy 1 1/8" (25.4mm quill) silver stem. 130mm reach and around 5 degree rise
6. Unbranded rear QR skewer
7. Profile 1 1/4" quill stem. 130mm reach and a minimal amount of rise
8. Clarks (I think) plastic bottle cage
9. Rusty old 22.2mm quill stem with 125mm reach
10. Black Elite bottle cage
11. Single pair of LX M560 cantis. Springs and dust caps are present but no mounting bolts or plastic washers
12. Deore LX LH STI unit. The plastic cover on the indicator window is missing but otherwise in good condition and in working order
13. Avid V brake lever (one only)
14. Strong aluminium bar cut down to 550mm (pics in third post)
15. Sakae The Tube 22.2mm quill stem with integrated cable stop. 125mm reach, with a little rise (pics in third post)
16. Cassano grips in decent condition (pics in third post)
TAKEN
1) XT M737 cantis. What you see is what you get. Springs and spring covers are there. Only one pad holder. Might be useful for spares
2) Curve cantis. What you see is what you get. Both pad holders present but no springs or bolts. Might be useful for spares
3) XT M734 cantis. No springs or spring covers but both pad holder present. Again, might be useful for spares
4) Shimano toe clips size L
5) Wellgo pedals with resin bodies. Both pretty smooth with no play
6) Red alloy bottle cage
7) ETC bar ends in nice condition
Deore LX pedals. One is smooth, the other has play and is not!
9) Zefal Spring cage
10) Unknown bottle cage in grey
11) Specialized bottle cage in silver
12) Rock Shox Judy XC for spares/repair. The steerer is 1 1/8" threadless (28.6mm OD) and is 178mm long. There is no compression or rebound but it can be slid up and down by hand, so isn't completely seized. The top cap is missing on one side. If someone wants the crown/steerer and someone else wants the rest I may be persuaded to split it. This might take a minute to post as I don't think I have any suitable packaging right now.
13) Mpedo flat pedals. All the pins are there and both are really smooth, though one has a tiniest bit of play
14) Tektro brake booster in blue
15) Selle Italia saddle dated 1996. Cover has come unstuck in a couple of places underneath. Some very minor nicks in the fabric on the corners
16) Crud Catcher with rubber bands
17) Zefal pump in fluro yellow. If I can find the frame mounts I'll include them, but not promising
1 1987 Turbo saddle in black. Great for a recovering project or just glue the tears and ride it
19) Silver 'Push' branded bottle cage
20) VP (I think) pedals with resin bodies and removable metal cages. Smooth and without play
21) 1995 Vetta Lite Gel saddle. Couple of little tears on the back, the worst one shown. Still nice and soft
22) Kalloy 26.8 x 300mm silver post
23) Marin IFT frame. This has been painted and had newer decals added but it's probably a 93 or close. Measure's 17" centre to to and the top tube is 22" c-c. Unfortunately it looks to have cracks where the seat stays meet the seat tube, which I've tried to capture in the pics - I don't have the inclination to look into it further to get confirmation. Seems a shame to bin it! (scrapped but mech hanger taken)
24) Cervus blue seatpost clamp 31.8mm
25) Specialized Comp-Set ahead stem for 1 1/8" steerer and 31.8mm bar. 100mm reach and around 5 degree rise
26) Genuine Shimano rear mech guard
27) Unbranded pair of cable hangers
2 Black Isca bottle cage
29) Taiwanese resin bodied pedals. Nice and compact and both pretty smooth and without play
30) Black Elite bottle cage
31) Wellgo reversible flat/spd pedals. No play but they could definitely use regreasing. I've straightened a bend in the cage but it's not perfect
32) Blue spoke nipples (I think I counted 47)
33) Unbranded 1" (22.2mm) quill stem, black with cable routing. 115mm reach and around 10 degrees rise. She ain't no lightweight!
34) Tioga Powerclips
35) Onza steel bar ends in black. Could do with refinishing
36) 35mm QR clamp. possibly from a 90's Marin IFT but I'm not sure
37) Fred Salmon brake booster in really, really faded red. Who wouldn't want two kissing fish boosting their brakes?
3 Rock Shox Mag fork brace
39) Dia Compe Vera PC8 levers. Paint flaking off as tends to happen with these
40) XT shark fin
41) Scott bar ends
42) Yellow Tacx bottle cage
43) Red Cannondale bottle cage
44) Single pair of XT M730 cantis. No mounting bolts, springs or dust caps. The pads are toast too!
45) Pair of Tioga Surefoot VI pedals with champagne coloured cages. These are a really nice pair of pedals, with a grease port in the body. They are smooth but have some play. They really just need a bit of love!
46) XC Pro brake levers which someone cut the ends off to fit brake lever extensions
47) Purple allen key seatpost clamp bolt
4 X-Lite Camlock bundle. Two pairs, from different years. You can see that they're pretty mashed but the rods are titanium and they might be useful for a project or spares. No springs or levers I'm afraid
49. FWE (Evans house brand) lock on grips
50. Storm branded bar. Moustache 'ish' style I guess. 630mm wide and 25.4mm clamp diameter
1. Probably only useful as an add on if you're taking something else but I have a load of various branded ahead stem top caps (Both GT ones, red Trek one, top left Kona, bottom row Kona, Cube, Marin and TA are taken), crank bolts and some Zefal pump clips (more pump clips than those pictured). Shown below in the first three pics on this post
2. Christophe toe clips
3. Unknown black plastic toe clips, more road style than MTB
4. Gripshift SRT500R 3x8 speed. Working fine but grips are filthy and covers are worn
5. Kalloy 1 1/8" (25.4mm quill) silver stem. 130mm reach and around 5 degree rise
6. Unbranded rear QR skewer
7. Profile 1 1/4" quill stem. 130mm reach and a minimal amount of rise
8. Clarks (I think) plastic bottle cage
9. Rusty old 22.2mm quill stem with 125mm reach
10. Black Elite bottle cage
11. Single pair of LX M560 cantis. Springs and dust caps are present but no mounting bolts or plastic washers
12. Deore LX LH STI unit. The plastic cover on the indicator window is missing but otherwise in good condition and in working order
13. Avid V brake lever (one only)
14. Strong aluminium bar cut down to 550mm (pics in third post)
15. Sakae The Tube 22.2mm quill stem with integrated cable stop. 125mm reach, with a little rise (pics in third post)
16. Cassano grips in decent condition (pics in third post)
TAKEN
1) XT M737 cantis. What you see is what you get. Springs and spring covers are there. Only one pad holder. Might be useful for spares
2) Curve cantis. What you see is what you get. Both pad holders present but no springs or bolts. Might be useful for spares
3) XT M734 cantis. No springs or spring covers but both pad holder present. Again, might be useful for spares
4) Shimano toe clips size L
5) Wellgo pedals with resin bodies. Both pretty smooth with no play
6) Red alloy bottle cage
7) ETC bar ends in nice condition
Deore LX pedals. One is smooth, the other has play and is not!9) Zefal Spring cage
10) Unknown bottle cage in grey
11) Specialized bottle cage in silver
12) Rock Shox Judy XC for spares/repair. The steerer is 1 1/8" threadless (28.6mm OD) and is 178mm long. There is no compression or rebound but it can be slid up and down by hand, so isn't completely seized. The top cap is missing on one side. If someone wants the crown/steerer and someone else wants the rest I may be persuaded to split it. This might take a minute to post as I don't think I have any suitable packaging right now.
13) Mpedo flat pedals. All the pins are there and both are really smooth, though one has a tiniest bit of play
14) Tektro brake booster in blue
15) Selle Italia saddle dated 1996. Cover has come unstuck in a couple of places underneath. Some very minor nicks in the fabric on the corners
16) Crud Catcher with rubber bands
17) Zefal pump in fluro yellow. If I can find the frame mounts I'll include them, but not promising
1
1987 Turbo saddle in black. Great for a recovering project or just glue the tears and ride it19) Silver 'Push' branded bottle cage
20) VP (I think) pedals with resin bodies and removable metal cages. Smooth and without play
21) 1995 Vetta Lite Gel saddle. Couple of little tears on the back, the worst one shown. Still nice and soft
22) Kalloy 26.8 x 300mm silver post
23) Marin IFT frame. This has been painted and had newer decals added but it's probably a 93 or close. Measure's 17" centre to to and the top tube is 22" c-c. Unfortunately it looks to have cracks where the seat stays meet the seat tube, which I've tried to capture in the pics - I don't have the inclination to look into it further to get confirmation. Seems a shame to bin it! (scrapped but mech hanger taken)
24) Cervus blue seatpost clamp 31.8mm
25) Specialized Comp-Set ahead stem for 1 1/8" steerer and 31.8mm bar. 100mm reach and around 5 degree rise
26) Genuine Shimano rear mech guard
27) Unbranded pair of cable hangers
2
Black Isca bottle cage29) Taiwanese resin bodied pedals. Nice and compact and both pretty smooth and without play
30) Black Elite bottle cage
31) Wellgo reversible flat/spd pedals. No play but they could definitely use regreasing. I've straightened a bend in the cage but it's not perfect
32) Blue spoke nipples (I think I counted 47)
33) Unbranded 1" (22.2mm) quill stem, black with cable routing. 115mm reach and around 10 degrees rise. She ain't no lightweight!
34) Tioga Powerclips
35) Onza steel bar ends in black. Could do with refinishing
36) 35mm QR clamp. possibly from a 90's Marin IFT but I'm not sure
37) Fred Salmon brake booster in really, really faded red. Who wouldn't want two kissing fish boosting their brakes?
3
Rock Shox Mag fork brace39) Dia Compe Vera PC8 levers. Paint flaking off as tends to happen with these
40) XT shark fin
41) Scott bar ends
42) Yellow Tacx bottle cage
43) Red Cannondale bottle cage
44) Single pair of XT M730 cantis. No mounting bolts, springs or dust caps. The pads are toast too!
45) Pair of Tioga Surefoot VI pedals with champagne coloured cages. These are a really nice pair of pedals, with a grease port in the body. They are smooth but have some play. They really just need a bit of love!
46) XC Pro brake levers which someone cut the ends off to fit brake lever extensions
47) Purple allen key seatpost clamp bolt
4
X-Lite Camlock bundle. Two pairs, from different years. You can see that they're pretty mashed but the rods are titanium and they might be useful for a project or spares. No springs or levers I'm afraid49. FWE (Evans house brand) lock on grips
50. Storm branded bar. Moustache 'ish' style I guess. 630mm wide and 25.4mm clamp diameter
Last edited:
