MSYT
Retro Guru
| Rockshox Quadra 21R £100 SOLD Dropout: 100mm Wheel size: 26" Brake type: Cantilever Steerer Diameter: 28.6mm (1 1/8" Threaded) Crown Race: 30mm (1 1/8") Steerer Length: 163mm Threaded section: 25mm Serviced with new elastomers 
SR Suntour MG90 Suspension Fork £60 SOLD This fork is in good working order. It has had all the elastomers replaced and the internals cleaned and greased. Dropout: 100mm Wheel size: 26" Brake type: Cantilever / V Brake / Disc Steerer Diameter: 28.6mm (1 1/8" threadless) Crown Race: 30mm (1 1/8" threadless) Steerer Length: 190mm Date Of Manufacture: 1999 Travel: Unknown but I would suspect around 60mm 
Shocktech Suspension Fork £80 SOLD Fork appears to be in good working order. I have not stripped it down to check fully. Suspension does move although there isn't much travel with a fork of this age Dropout: 100mm Wheel size: 26" Brake type: Cantilever / V Brake Steerer Diameter: 25.4mm (1" threaded) Crown Race: 27mm (ISO) Steerer Length: 145mm Date Of Manufacture: Unknown Travel: Unknown 
Marzocchi XC51 Suspension Fork (At least that's what I believe it is... it came off a 1994 Kona AA and that's the standard fork for that model) £20 SOLD Dropout: 100mm Wheel size: 26" Brake type: Cantilever Steerer Diameter: 28.6mm (1 1/8" Threaded) Crown Race: 30mm (1 1/8") Steerer Length: 140mm Threaded section: 58mm The fork is clearly a bit beat up. The lowers definitely need to be repainted. The crown appears to have some heavy cable rub (or something else worn grooves in to it). There are a few rust spots on the stanchions. The fork does move smoothly but I haven't tested in on the bike or tried to see if it holds air. Basically... just imagine is needs a complete rebuild. 
|
Last edited:
