Trimble help (CNC work involved)

[retrobikeguy]

Anyone fancy making one of these for me ?

its a top tube cable stop for the Trimble with a 3/8 (I think) thread and unfortunately mine came without one, I have a few ideas on how to get around the problem but none are really ideal, this is the only picture I have of one and the hole is drilled the same diameter all the way through on this picture for disc hose but I need one for cables, I have tried getting in touch with flyingsuperpetis on the mtbr.com site but to no avail - so if you can help or have a solution ............. fire away

 

[jez-4-bikes-max]

I can provide the original if required? If someone wants to try and copy it?

 

[scant]

re-thread a hope disc guide for fork canti stud?

 

[retrobikeguy]

Yeah,

thought about the hope guides but it wouldnt work with a cable guide / stop, was oriinally thinking of just finding an M10 allen bolt in alloy, re-threading then drilling it but can I find an M10 alloy bolt........................no

Jez , if I can find a willing CNC'er your offer will probably be snapped up, gonna need about 3 as I know of someone else in the same boat as me and I would like a spare too.

 

[scant]

www.tastynuts.com motorbike alu bolts, they should do M10?

 

[retrobikeguy]

got the catalogue off them and they go up to 8mm in alu, then its titanium which yould be a little harded to re-thread & drill I imagine.

 

[scant]

got the catalogue off them and they go up to 8mm in alu, then its titanium which yould be a little harded to re-thread & drill I imagine.

zip tie the cable on

 

[retrobikeguy]

zip tie the cable on

:shock: :shock: :shock:

Think B3 is on it now

 

[scant]

anygood? http://cgi.ebay.co.uk/M10-EYE-BOLT_W0QQ ... dZViewItem

 

[retrobikeguy]

not Quite what I was thinking of.

Jez, YGM