Rod_Saetan
Old School Grand Master
- Feedback
- View
When will this ever get built!? Time for this and many others to go, I got as far as it just neeeding cables but I never rode it. Sad face. One of, erm, your guess is as good as mine, but I've not seen another. Legendary South London frame builder who could build anything to a very high standard, famed for his touring and TT bikes. Reynolds 531 frame and fork, fillet brazed/partially lugged construction, very well put together I'd guess in the late 80s. Paintwork is pretty battered and faded as pictured, no dents though and it also has a little crimp in the seat tube where it has been over-tightened in a previous life, this was a tight fit with seat posts but now works nicely with a 27.2.
Seat tube = 15.5" centre to centre / 17.5 " centre to top
Top tube = 21.5 " centre to centre
130 mm spaced rear dropouts
1" head tube (British thread)
British thread BB
27.2 seat post
£200 plus post or you can collect from SW London. Many, many parts available to go with it if you are after something specific!
Seat tube = 15.5" centre to centre / 17.5 " centre to top
Top tube = 21.5 " centre to centre
130 mm spaced rear dropouts
1" head tube (British thread)
British thread BB
27.2 seat post
£200 plus post or you can collect from SW London. Many, many parts available to go with it if you are after something specific!