Time Atac Titanium

[fotorat1]

Hi the bearings are shot on my Ti atacs - so I have stripped one down and tried to remove the bearing but it shattered and the bushing broke to

Can I still get the bushing for these as I really want to get them going again

 

[mattr]

Yes, the bushing is available, think it's a standard commercial one.

This is the one from the later pedals, i *think* it's the same one, but if you can measure whats left of it, you should be able to find longer/shorter bushes as required.

https://simplybearings.co.uk/shop/p1203 ... _info.html

There is also an igus olite(?) bushing that is available that fits, can't find a link to that though.

 

[fotorat1]

Apologies - my OP was from memory when I stripped it a few weeks ago- I meant to say can we still get the mud/dust collar - as you can see below the Far left item - I Hamfisted it and it broke when attempting to remove the bearing!!!

If not I dont think its a problem as there is another shield ( 2nd from left)

Photo has the parts in order that they came off

The bearing shaft on the axel is 12mm - any idea of the exact bearing size please - - if not I still have tjhe other pedal unstripped.

 

[mattr]

No idea then, would think you'd need to find another pair to strip for that...... i mean, the pedal has been out of production 20 years near enough.

 

[LJM]

Have you tried HubDoctor on eBay?