Re:
Let me pick your collective brains....
The Usher is here, the 95 arrives today and the Krell arrived yesterday.
As a matter of course when a new bit of kit arrives I check the mains plugs, have seen some iffy wiring over the years and find it a worthwhile check...
The Krell came from Vickers Hifi in York, apparently tested and deemed ok to sell.
I opened the plug on arrival to be confronted with the earth wire not connected and the end taped over. It's an American lead with white, black and earth.
I called the dealer and told him, he suggested it would be fine just to reconnect the earth... :roll:
Commence immediate tripping of RCD and blown 2amp fuse in back of pre... :facepalm:
I tracked down replacement fuses up town and had another go with a lead of my own I have and it blew again immediately.
So, with one fuse left I disconnected the earth wire from the plug, switched it on and hey-presto.... it runs!
I checked the casework with a meter to make sure it wasn't live and all was ok.
Thing is, when I called them back he basically implied that if I hadn't opened the plug then everything would have been perfect, they ran it on demo in the shop using the lead they supplied me! :evil:
I've been in touch with Krell directly, awaiting a response from them, but I think It's going to have to be returned as I have no satisfactory reason as to why it operates without the earth connected!
The top pin on the socket doesn't have a wire connecting to it which is unusual, but googling images of KSL preamps they're all the same...
Any suggestions?! :?