Re: Replacement elastomer for Manitou 2/3/4 & Judy *NOW PROFLEX*
Doesn't seem to be many reviews, so here goes...
I've just rebuilt my Manitou 2 forks using these rubbers. I sorted the sale through email, which worked well for me & the replies from Rob have been very quick. His email in case you missed it elsewhere in this thread... rob@bikemag.hu
Delivery was also very quick considering what a shambles the world is currently in!
I was a little confused over the amount of rubbers I needed for the rebuild, too much time spent on Google instead of going with my gut. In the end I've fitted 2.5 rubbers on each side. The rubbers are really easy to cut, just ensure you use a new blade.
The other thing I got hung up on was what rubbers I needed, soft, medium or hard. The first thing to note on these rubbers, they are not the same hardness as the originals. I'm not the smallest of guys & used to bottom out the originals when fitted with mediums, so ran a mixture of mostly the hard set, with 1 small medium on each side. I've fitted all medium rubbers on my rebuild & they have yet to bottom out. They feel nice & smooth, without depressing too much under harsh pedal load.
The rebound rubber was also shot on my forks, they had turned into black tar. Again, after over thinking this & trying to work out length etc, I gave up & cut a soft rubber in half, sticking a full half in each side. I expected these to be too big, but they seem to work fine. Certainly no clunking that I've noticed.
A quick note on fitment, Rob has said any grease can be used with these rubbers, so right or wrong, I've just used a lithium based multi-purpose grease. Google just added more confusion than useful information on grease type for this job, so fingers crossed that won't come back to bite me. I found alcohol based wipes helped clean all the old crap away from the forks & fittings. It was a long job to clean everything up, but definitely worth the time. I left the forks on the bike for the rebuild, which made putting the long bolt back in much easier. You can compress the forks to get the bolts into the treads by just pushing down on the handlebars.
Sorry this has go a little long, so I'll quickly finish by saying, if you need to rebuild your forks, give these a go! Many thanks to Rob to giving my 25 year old forks a new lease of life!
Doesn't seem to be many reviews, so here goes...
I've just rebuilt my Manitou 2 forks using these rubbers. I sorted the sale through email, which worked well for me & the replies from Rob have been very quick. His email in case you missed it elsewhere in this thread... rob@bikemag.hu
Delivery was also very quick considering what a shambles the world is currently in!
I was a little confused over the amount of rubbers I needed for the rebuild, too much time spent on Google instead of going with my gut. In the end I've fitted 2.5 rubbers on each side. The rubbers are really easy to cut, just ensure you use a new blade.
The other thing I got hung up on was what rubbers I needed, soft, medium or hard. The first thing to note on these rubbers, they are not the same hardness as the originals. I'm not the smallest of guys & used to bottom out the originals when fitted with mediums, so ran a mixture of mostly the hard set, with 1 small medium on each side. I've fitted all medium rubbers on my rebuild & they have yet to bottom out. They feel nice & smooth, without depressing too much under harsh pedal load.
The rebound rubber was also shot on my forks, they had turned into black tar. Again, after over thinking this & trying to work out length etc, I gave up & cut a soft rubber in half, sticking a full half in each side. I expected these to be too big, but they seem to work fine. Certainly no clunking that I've noticed.
A quick note on fitment, Rob has said any grease can be used with these rubbers, so right or wrong, I've just used a lithium based multi-purpose grease. Google just added more confusion than useful information on grease type for this job, so fingers crossed that won't come back to bite me. I found alcohol based wipes helped clean all the old crap away from the forks & fittings. It was a long job to clean everything up, but definitely worth the time. I left the forks on the bike for the rebuild, which made putting the long bolt back in much easier. You can compress the forks to get the bolts into the treads by just pushing down on the handlebars.
Sorry this has go a little long, so I'll quickly finish by saying, if you need to rebuild your forks, give these a go! Many thanks to Rob to giving my 25 year old forks a new lease of life!