Syncros, Suntour, Shimano, Control Tech, more

[cyclotoine]

Re: XTR front mechs, stems, posts (syncros, Race face, USE)

What stems do you have still?

see post 1 for 150 and 140mm silver syncros cattleprods 1-1/8"

Also 135 mm control tech.

Might also have a black 140 cattlehead and might also part with a 1-1/8" 130mm silver cattleprod if you're interested in those.

 

[cyclotoine]

Re: XTR front mechs, stems, posts (syncros, Race face, USE)

added a 140mm 15D cattlehead in black with alloy top cap. $45...

still some nice derailleurs and posts here.

 

[cyclotoine]

Re:

also need to take photos but I have a set of Suntour hubs 32h which came off a 1991 rocky mountain. 7 speed and comes with cassette which is in okay serviceable condition. Also original skewers. The group on the bike was XCD but the hubs simply say Suntour. I rebuilt both and while not in perfect shape they are pretty good and roll well. I also rebuilt the freehub with all new bearings. The only issue is a bit more freehub wobble than I'd like which somehow translates into a ghost of play in the rear hub. I think the next step would have been to put a 10 speed shimano cassette space between the freehub and the shell. Otherwise I did ride them as is and it worked fine. Asking just $15 US plus shipping knowing shipping is going to cost as much or more then that depending on where you are.

 

[cyclotoine]

Re: Syncros, Suntour, Shimano, Raceface, Blackspire, Dia-compe

UP! Lots new here and old items have lower prices.

 

[cyclotoine]

Re:

It's spring. Help me clean!

 

[cyclotoine]

Re:

Sunday bump.

 

[cyclotoine]

Re:

UP!

 

[Mr Toad]

Re:

Is the silver $10 cattle prod still available ?

Is all the bits with it ? Top cap , bolt etc

If so , yes please.

 

[cyclotoine]

Re: Syncros, Suntour, Shimano, Raceface, Blackspire, Dia-compe

Would also consider trades:

ISO:

Black BR-M734 Cantilevers
Syncros handlebars uncut, sleeved versions.
Rocky Mountain shoulder holder saddle
Set of road side pull brake calipers of basic but decent quality 1980s vintage (for a flipper bike), also interested in matching set of levers.

 

[cyclotoine]

Re:

A couple corrections to first page.

RaceFace post is 26.8 not 28.6!

Also Control tech stem is not 0 Degrees as it said before it has rise!

Coming Soon: bontrager ti bar cut to 54cm with slight bar end crimp. $50

: Deore DX crank arms in nice shape $30

: 94 and 110 BCD chain rings

: Unknown suspension fork brace?