Syncros Revolution 110BCD with Syncros rings for sale

[ErikFive]

Syncros Revolution 110BCD with Syncros rings for sale.

As you can see they are stripped for paint. So basically you have to paint them black again and put on new decals and they will look good as new. I had a plan on doing this myself, but an opportunity came up for a frame and fork I really want, so I am selling this again.

Rings are used, but in good condition. They are 24, 36 and 48. Cranks are 110BCD and 175mm.

Selling for 300eur + shipping and fees. Located in Norway.

 

[ErikFive]

Will trade for high end 1" stem with noodle. Salsa or IRD. Not to long though.

 

[PeteC]

Re:

I PM'ed ya' on Facebook messenger, Erik.

 

[ErikFive]

Sold pending funds.

 

[RockiMtn]

btw, that inner ring is mounted backwards. and possibly the middle too depending on the machine finish around the mounting holes. one side should have countersunk for chainring bolt head.

 

[ErikFive]

So half the rings has the lettering and T count outwards and the rest inwards? That would be the first time I see that.

btw, that inner ring is mounted backwards. and possibly the middle too depending on the machine finish around the mounting holes. one side should have countersunk for chainring bolt head.

 

[RockiMtn]

Re:

that's from my experience. it depends on the rings. if ramped the middle ring logo/teeth count faces outward like the outer ring. but unramped it faces inward towards the BB. the inner i believe are always facing inward. but like i said, you have to look at the actual ring itself and see which side the counter sunk is on the holes to match chain ring bolt head mounting.

here are some examples, some are mine (last three) and others i found on the web.