Syncros Noodle Stem

[pistolpedro]

Hi

I am looking for a Syncros Noodle stem 1 1/8th ideally around 140mm in length,


Not to fussed on condition as i intend to repaint it

Thanks

Pete

 

[schwartzy16]

I have a 150mm. PM me if interested

Mike

 

[MatBH5]

Re:

Probably got one - I'll check!

 

[MatBH5]

Re:

Hi there,

Mine is 150mm too, with 3 degree rise. 25.4mm (which I think is 1&1/8"?)

Photo to follow.

£40 posted UK ppg

 

[pistolpedro]

Thanks guys

can i double check, i used an online convertor and the 25.4 was coming out at 1inch?

I am not to knowledgeable on these but i think i'm right in saying that you could get them in 1 inch?

if it helps at all its for a 1991 Marin Palisades its currently running the standard richey (1 1/8th?) headset but id like to upgrade to an XT

 

[MatBH5]

Re:

Ok, don't take this as gospel, but the fork steerer is 1&1/8 external so the insert is 1" to slide inside....
For a 1" steerer, the stem diameter is 22.something.
This certainly isn't a 1"! Those have a step down in the shaft.
Edit - the attached photo probably explains better:

 

[pistolpedro]

Re:

Thanks for explaining