Suspension fork id

[ishaw]

Came on a bike I picked up. Thinking they may be sids based on the air valves on the top, but hopefully someone will know for sure.

There's a rebound dial on the right lower leg.

No decals at all.

Whatever it is, I'd like to find a replacement for the air valve as ones missing. Any ideas where I could find an original or failing that, a pair of something that will do the trick?

Decals too once 8 know the model and year.

 

[d8mok]

Looks like a SID to me. 2000 ish when they went to the non SID looking crown for a year or so

 

[novocaine]

aren't a standard Schrader insert? taken out with a valve key that's just a bit of tube with a cutout in one end?

 

[ishaw]

aren't a standard Schrader insert? taken out with a valve key that's just a bit of tube with a cutout in one endp

Probably, but there's an internal thread for the cover to screw into.

 

[ishaw]

I think the forks may be sid xc hydra air.

Can't find many decal options that aren't in the USA so postage is almost as much as the decals.

Anyone think k of anything that can be used as a cap/cover for the valve? Going to raid the spares box as I'm sure I had a set of trashed sods and would have pillaged parts like this before binning.

 

[novocaine]

Probably, but there's an internal thread for the cover to screw into.

but you are only replace the valve not the body, or am I not understanding something here? (quite possible to be honest).

 

[novocaine]

Send me dimensions, I'll print you a push in copy of the original.

Find me a picture of the fork with decals.

 

[ishaw]

but you are only replace the valve not the body, or am I not understanding something here? (quite possible to be honest).

Thanks, looking for a replacement black plastic cover, same as one on the other side.

 

[ishaw]

Send me dimensions, I'll print you a push in copy of the original.

Find me a picture of the fork with decals.

Thanks, will do.

 

[ishaw]

Here's a decal pic