Suspension Fork for '97 Explosif ?

[wadsy]

strugling at the min as my phone has died but i will rev up the slr tonight and sort something.

Sorry, just sent you another 'hassling' pm

Cheers

 

[wadsy]

Up-date

Spent a fair amount of time today swapping the Pace RC36's from my SC Superlight to the Kona, changing the travel from 100mm to 80mm en route!

I can now swap from the RC's to the P2's as required as I fitted the same crown race to both forks

The Superlight now has a set of Marzocchi Marathons on in a very similar grey to the frame, so works well I think

Pics to follow.....

 

[wadsy]

Raises the front by about 20mm, so not too bad.

 

[Tallpaul]

All you need is a black seat-post and stem spacers (although ideally a shortened steerer tube)

 

[wadsy]

All you need is a black seat-post and stem spacers (although ideally a shortened steerer tube)

Both items should be on their way and then I'll see about shortening the steerer tube(s)

Cheers

 

[Easy_Rider]

I like the looks
What tyres are those?

 

[wadsy]

I like the looks
What tyres are those?

IRC Yeti FRO Geo Claws!...

Full spec (subject to change!) here....

http://www.retrobike.co.uk/forum/viewto ... highlight=

Cheers

 

[DoctorRad]

Re: Up-date

... changing the travel from 100mm to 80mm en route!

How'd you do that then? I may want to go the other way at some point...

 

[wadsy]

Re: Up-date

... changing the travel from 100mm to 80mm en route!

How'd you do that then? I may want to go the other way at some point...

It's basically taking the fork apart and changing some bits around and adding a couple of different plastic 'washers' :!:

If you have the manual, it tells you in there how to do it.