Jacque Lucque
Retro Guru
- Feedback
- View
Doing my usual clear out of stuff from the shed. All items as priced + £4.20 for MyHermes tracked delivery. The odd prices are to account for PayPal fees.
Items are also available on fleabay, albeit cheaper here often: http://www.ebay.co.uk/sch/jacque_lucque ... 7675.l2562
Surly Fixxer
For sale is a Surly Fixxer, used to convert Shimano hubs into fixed gear/single speed hubs. By replacing the freehub body on the hub, you are left with a very useful fixed hub with all the convenience and longevity of cup and cone hubs!
The fixxer only comes with the replacement freehub body and the very posh enduro bearing cartridge bearing. The unit is very clean all over with only a couple little bumps to the edges of the body. The fixxer does not come with the spacers needed for the other side of the hub but these aren't hard to get at all.
More information on the fixxer can be found on Surly's website http://surlybikes.com/parts/fixxer alongside the instructions for fitting the fixxer.
£26.09
NOS Sugino 47t Chainring, 130BCD
Beautiful chainring which can make for closer ratio shifting on a regular sized crankset. I was going to fit this to my touring bike, but decided I would just be a hard man with my 52t instead.
Not much to say other than it's lovely and NOS!
£12.63
Shimano 8spd Bar end shifters
Beautiful, crisp bar end shifters. Only a bit of scuffing to the outside edge of the shifter pods.
Rubber grips in good condition and holding well.
Really good, satisfying shifting. Wish I was running 8 speed or I'd keep them for my self!
£26.09 (A bargain for such tasty, crisp shifters!)
Shimano RSX STI Shifters
SOLD
More of a karma sale than anything else. I bought these shifters hoping I'd be able to get the LH shifter working to no avail. The rear (7 Speed) is working excellently and has been thoroughly cleaned inside.
The LH shifter would be a relatively easy fix if you had the parts as it's just one of the pawls that catch the ratchet that has failed. The plastic body which covers the shifting mechanism is also broken. Lastly, the handlebar clamp is also missing on the LH shifter!
There is no reason why you couldn't just use the RH shifter in a 1*X setup. Perfect for this upcoming cross season?
£5 as that's what I paid for them!
If you have any questions, don't hesitate to ask. I also have some mountain bike items for sale here: http://www.retrobike.co.uk/forum/viewto ... p;t=267085
Items are also available on fleabay, albeit cheaper here often: http://www.ebay.co.uk/sch/jacque_lucque ... 7675.l2562
Surly Fixxer
For sale is a Surly Fixxer, used to convert Shimano hubs into fixed gear/single speed hubs. By replacing the freehub body on the hub, you are left with a very useful fixed hub with all the convenience and longevity of cup and cone hubs!
The fixxer only comes with the replacement freehub body and the very posh enduro bearing cartridge bearing. The unit is very clean all over with only a couple little bumps to the edges of the body. The fixxer does not come with the spacers needed for the other side of the hub but these aren't hard to get at all.
More information on the fixxer can be found on Surly's website http://surlybikes.com/parts/fixxer alongside the instructions for fitting the fixxer.
£26.09
NOS Sugino 47t Chainring, 130BCD
Beautiful chainring which can make for closer ratio shifting on a regular sized crankset. I was going to fit this to my touring bike, but decided I would just be a hard man with my 52t instead.
Not much to say other than it's lovely and NOS!
£12.63
Shimano 8spd Bar end shifters
Beautiful, crisp bar end shifters. Only a bit of scuffing to the outside edge of the shifter pods.
Rubber grips in good condition and holding well.
Really good, satisfying shifting. Wish I was running 8 speed or I'd keep them for my self!
£26.09 (A bargain for such tasty, crisp shifters!)
Shimano RSX STI Shifters
SOLD
More of a karma sale than anything else. I bought these shifters hoping I'd be able to get the LH shifter working to no avail. The rear (7 Speed) is working excellently and has been thoroughly cleaned inside.
The LH shifter would be a relatively easy fix if you had the parts as it's just one of the pawls that catch the ratchet that has failed. The plastic body which covers the shifting mechanism is also broken. Lastly, the handlebar clamp is also missing on the LH shifter!
There is no reason why you couldn't just use the RH shifter in a 1*X setup. Perfect for this upcoming cross season?
£5 as that's what I paid for them!
If you have any questions, don't hesitate to ask. I also have some mountain bike items for sale here: http://www.retrobike.co.uk/forum/viewto ... p;t=267085
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
