passiflora
Old School Grand Master
- Feedback
- View
Suntour XC Pro please
- Thread starter passiflora
- Start date
passiflora
Old School Grand Master
- Feedback
- View
I now have
Nos Xc pro cantilever
&
Nos Xc pro hubs and cassette.
Thanks Rob
Still looking for
XC Pro Front mech 28.6 top pull
XC Pro chainset
XC Pro shifters
XC Pro rear mech
Nos Xc pro cantilever
&
Nos Xc pro hubs and cassette.
Thanks Rob
Still looking for
XC Pro Front mech 28.6 top pull
XC Pro chainset
XC Pro shifters
XC Pro rear mech
reforminded
Dirt Disciple
I have a NOS XC pro crankset, 170mm length. Never seen a bike, but without packaging. Please PM if interested. I also have shifters (well used) and a couple excellent condition frond derailleurs.
I have the following XC Pro in NOS or VGC that I'm unlikely ever to use:
* Canti brake levers (1990-92 ish resin dipped vintage)
* 1-1/8" headset
* 110/74 Crank arms (no rings)
* Wishbone shifters (7-speed) with or without cable outers
* Replacement thumbshifter handlebar mounts
* Sealed jockey wheels
I also have lots of nearly new and more heavily used GreaseGuard bottom brackets, as well as used front and rear (screw-on) hubs. There's also an XC Pro MD crankset which has good arms and good-to-fair rings.
Let me know what you might be interested in and I'll do photos.
As for top pull front mech, original SunTour only ever did one which was a generic 'XC' MD model from 1993. I picked one up for my On-One from the US a couple of years back for about £15. Here's another NOS: http://www.ebay.co.uk/itm/321057914655
* Canti brake levers (1990-92 ish resin dipped vintage)
* 1-1/8" headset
* 110/74 Crank arms (no rings)
* Wishbone shifters (7-speed) with or without cable outers
* Replacement thumbshifter handlebar mounts
* Sealed jockey wheels
I also have lots of nearly new and more heavily used GreaseGuard bottom brackets, as well as used front and rear (screw-on) hubs. There's also an XC Pro MD crankset which has good arms and good-to-fair rings.
Let me know what you might be interested in and I'll do photos.
As for top pull front mech, original SunTour only ever did one which was a generic 'XC' MD model from 1993. I picked one up for my On-One from the US a couple of years back for about £15. Here's another NOS: http://www.ebay.co.uk/itm/321057914655
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I think the arms on the set I have are in better condition than that.kingroon":1rwic4g4 said:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
