Steerer Tube Swap Shop - shorter for longer! NO SALES!

[mrkawasaki]

http://www.ebay.nl/itm/Tune-Titan-Rohr- ... 504wt_1273

Can't comprehend Dutch - but looks interesting...

 

[KOONSKAU]

rockshox judy xc

looking to swap steerer and crown from rockshox judy xc 158mm 1 1/8 threaded for 210mm plus 1 1/8 aheadset

 

[Big D]

Hi,

I've got a rock shox judy 1.25 steerer at 206mm and am in need of a 1" steerer threaded or non. Anyone out there that can help please?

 

[Rio]

Hi!
looking for a mag21 or specialized fs crown/steerer in 1 inch and 135 mm long

I've got a 1 1/8 unthreaded in 175 mm for trade.

anyone?

 

[Drewson]

Looking to swap a Manitou 1 steerer/crown in 1"1/8 threaded (210mm total length or 185mm from the crown) for a 1"1/4 threaded steerer/crown for the same forks in a similar length but will consider smaller as it's for a smaller bike.

 

[BoyBurning]

Pace steerer swap...

I have a 1.125" steerer from a pair of RC35 MXCD forks.

It's ahead, and it's full length [removed from forks] is 210mm [206mm to the retaining circlip].

I would like a 1.125" threaded one to replace it with, roughly 150-ish mm from the crown when fitted [slightly less i think but need to measure up].


I would like to swap only at this stage thanks!


BB

 

[ibbz]

I have a 1 1/8 THREADED steerer tube to fit a pace RC35MXCD fork in 140mm

I need 1 1/8 THREADED in 160mm or a bit more.

 

[al-onestare]

Hiya all.

I have a 1 1/8 unthreaded steerer and crown, just shy of 200mm, for a pair of '97 Z2 Bombers.

I need the same but 220mm or more.

If you have anything then please PM me.

Cheers!

 

[mkozaczek]

Need a long 1" threadless or threaded steerer for a mag-21

Have several others (Mag-20, 21, Manitou etc,) to trade, short 1", 1 1/8" and others

 

[skinnyboy]

Hi guys I need a Manitou Sport crown and steerer 1" x 5" threaded or thread less if you have it but has to be 1"

I Have a 4" one but its too short for the frame.