Steerer Tube Swap Shop - shorter for longer! NO SALES!

[Minifreak]

Hey guys, I am after an early Manitou steerer/crown suitable for a Manitou 2/3/4 or Comp, 1 1/4" preferably but could use 1 1/8", threaded and around 170mm in total from crown.

I have a 1 1/8" threaded around 155mm and a 1 1/4" threaded which is very long, can trade either of these.

Thanks

 

[stingray230sx]

i have a chance to pick up a mag21 in need of service, but its a 1-1/8" threaded steerer crown aprox 196mm [7-3/4"] and I need 1-1/8" threadless same length or 203mm [8"]

anybody need a 196mm 1-1/8" threaded steerer crown for a mag21? that has a 203mm to swap?

 

[redaeston]

I am after a 1 1/18 threaded around 170mm. I have a pace 1 1/8th around 240mm.

 

[longun]

Re:

I may have one, need to check the length in the morning fella

 

[BikerB]

I need either 163mm threaded steerer or 200mm plus non threaded..

I have a 188mm steerer that i don't need ..
Size is 1 1/8 on all steerers.
These are needed for a marzocchi z3 forks..

 

[Pionir]

Rockshox Mag 21 / Paris Roubaix SL (same stanchions diameter / spacing)

I have 200mm titanium 1" threaded steerer (New, unused!)

Need a 180mm 1 1/8 threadless *or* 230mm threaded 1"

Steerer is off a Rockshox Paris Roubaix S is titanium and will also fit Mag 21 etc. Don't care whether new one is steel, titanium or aluminum, just needs to fit

Edit: I bought a steerer off ebay so the titanium Crown / Steerer will be for sale in a few weeks

 

[Dunx78]

Re:

Hi Guys

I need a Manitou 1-2-3 crown 1 1/8 threaded 18cm or larger.

I have a 15.5cm one to swap or an inch threaded at 17cm

cheers in advance

 

[rollo91]

Re:

Hi, I am looking for a uncut 1 1/8 ahead steerer for mag 21, or pretty long. I have a NOS threaded 1 1/8 one and a used 1" ahead one to trade. Please pm me if you can help. Kind regards David

 

[chillibiker]

Re:

Looking for a steer tube for a marzocchi xcr. I believe any thing will fit it has the bolt on style crown. After a 200mm threaded I have a 195mm thread less thanks

 

[RickTheUncivil]

Have a pace 1+1/8th ahead, want a pace 1" ahead. Any swapsies?